Description
The EZ Drift LVS34 transducer hood is made for one job: stopping the wire out of a Garmin LVS34 from flexing and breaking right at the transducer. That joint takes a beating every time the motor stows or the transducer swings, and a hood spreads the bend out so the cable isn’t folding at one point.
What’s in the package
- The hood for the LVS34
- A mounting handle for the factory mount
- A mounting handle for the EZ Drift Trolling Systems Transducer Clip
The two handles mean you can fit the hood whether your LVS34 sits on Garmin’s factory mount or on an EZ Drift clip, and you don’t need to buy anything else to make it work with the factory setup. Garmin’s LVS34 installation manual shows the factory mount if you want to see how it goes together.
One thing it doesn’t work with
The EZ Drift LVS34 transducer hood is not compatible with the LVS34 Knob. If you run that knob, this hood isn’t for you.
The EZ Drift clip we stock is listed in LVS32 and Lowrance ActiveTarget versions, not LVS34, so email us before you plan a setup around the clip handle. We’d rather sort that out before you order than after.
Why the cable exit needs help
Live sonar cables are not cheap to replace, and a common failure point is where the cable meets the transducer housing. Each stow, deploy and sweep bends it a little at that spot. Over a season, that adds up. A hood gives the cable a gentler curve and takes the load off the joint.
It costs a small fraction of a Garmin LVS34 transducer, which is why we’d fit one on any LVS34 that lives on a trolling motor.
Installing it
Take the transducer off its mount first and lay it on something soft. Fit the EZ Drift LVS34 transducer hood around the cable exit, choose the handle that matches your mount, and reinstall. Keep the handle you didn’t use; it’s the one you’ll need if you change mounts later. Before you head out, stow and deploy the motor a few times and make sure the cable moves freely without kinking at the hood.
LVS34 hood questions
Does the EZ Drift LVS34 transducer hood fit an LVS32?
No. The LVS32 has its own EZ Drift hood in GEN 1 and GEN 2 versions.
Will it work on the factory Garmin mount?
Yes. A handle for the factory mount is in the package.
Can I return it?
If it’s unused, yes, within 30 days. See our returns policy.
More parts are under EZ Drift accessories. Email sales@trollingmotorsdirect.org with your transducer and mount setup and we’ll check the fit.









