Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Bridge Double Extender

Price range: $190.00 through $213.00

A bolted, powder coated aluminum bridge that carries up to four monitors, with offset bolt patterns on one side and between the legs. 13″ leg span, choice of 5″, 6″, 7″ or 8″ legs.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

When two or three screens aren’t enough, the bridge double extender is the one to look at. It allows up to four monitors off a single bridge, using an offset bolt pattern on one side plus a second offset bolt pattern in the middle of the bridge legs. The legs span 13″, and you can bolt it to the deck facing either direction.

How four monitors fit

The two offset bolt patterns are what make the bridge double extender different from a standard bridge. One sits off to the side of the bridge, and the other sits between the legs. Mounts attach to those patterns, gimbals go on the mounts, and the screens hang off the gimbals.

Because it can face either way on the deck, you can put the offset side toward port or starboard, whichever keeps the screens clear of your trolling motor cables and gives you the better view.

Specs

  • Up to 4 monitors off the bridge
  • Offset bolt pattern on one side, plus an offset bolt pattern in the middle of the legs
  • Bridge leg span: 13″
  • Leg height options: 5″, 6″, 7″, 8″
  • Machined aluminum, bolted together, powder coat finish
  • All hardware stainless steel; assembles with standard Allen wrenches
  • Gimbals, graphs and deck mounting hardware not included
  • Made in the USA

The powder coat finish is baked on, which makes it tougher than spray paint against rod butts and boots.

Leg height and measuring

The ruler photos show the bridge with 5″ legs. If you pick 6″, 7″ or 8″, add the extra to the heights you see there. Go taller if your pedal needs the clearance or you want the screens higher when standing.

Four screens is a lot of width. Lay the bridge double extender on the deck with cardboard cut-outs of your screens and make sure nothing hangs off the edge, blocks your path to the bow, or sits where the trolling motor swings when you stow it.

Installing

Bring deck hardware to suit your deck. Four monitors put real weight on top, so on an aluminum deck we’d add the Bridge Under Plate underneath to cut flex. Plan cable routing first; four sets of power and transducer cables add up fast. Our Garmin LiveScope guide covers how most anglers split screens between live sonar and mapping.

Questions

Does the bridge double extender include mounts or gimbals?

No. It’s the bridge only. Mounts, gimbals and graphs are separate.

Can it go on the deck backwards?

Yes. It can be mounted in either direction, so the offset side can face whichever way works on your boat.

More options are in our bridge mounts section. Email sales@trollingmotorsdirect.org with your boat, pedal and screens and we’ll help you lay it out.

Additional information

Bridge Leg Height

5", 6", 7", 8"

error: Content is protected !!