Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin Force Pro bow mount trolling motor from Trolling Motors Direct Lowrance Ghost bow mount trolling motor Garmin Force Kraken trolling motors in black and white

Trolling Motors Direct

Trolling motors for the first cast of the day.

Garmin and Lowrance bow mount trolling motors, live sonar and graphs from the big three, and the machined mounts that hold it all steady.

Pick a motor
GARMINLOWRANCEHUMMINBIRDCORNFIELD FISHING GEARSEAARKTURTLEBOXPRO-GUIDE LITHIUM

Bundle deals

Sonar and the mount it needs, in one box

MEGA 360 kits come with the mount cut for your motor: Terrova, Kraken, Recon or Power-Pole Move PV.

Live sonar · 0–80 ft

Watch the fish before you make the cast.

Forward-facing sonar from Garmin, Humminbird and Lowrance, the graphs that run it and the poles and mounts that aim it.

Lowrance HDI sonar nosecone for the Ghost trolling motor Lowrance HDI Nosecone for GhostSonar built into the motor
GARMIN LIVESCOPE XR$2,999.99HUMMINBIRD MEGA LIVE 2$1,599.99GARMIN SPY POLE$1,999.99GARMIN FORCE PRO$4,199.99LOWRANCE GHOST$3,199.00HUMMINBIRD APEX 19$5,299.99LOWRANCE RECON$3,669.99

Shop by system

Pick your view of the water

Humminbird MEGA Live 2 Imaging

Humminbird

MEGA Live 2 Imaging

Forward, Down and Landscape views with MEGA Imaging detail.

$1,599.99
Garmin Force Pro trolling motor control panel with battery meter
ANCHOR LOCKHEADING HOLDROUTE FOLLOW

Featured Garmin trolling motor

Garmin Force Pro

$4,199.99

  • PositionMultiband GPS for anchor lock, heading hold and route following
  • ControlSteering, thrust and anchor lock from your Garmin chartplotter
  • MountScissor-style with pull cable and dual gas springs
  • PropsHigh efficiency and weedless, both in the box

Mounts & poles

Aim the transducer. Hold the graph.

CNC-machined aluminum mounts with a black anodized finish and stainless hardware, plus motorized poles that point your sonar for you. Scratch & dent mounts start at $88.

Before you buy

Buying trolling motors from us

We only sell gear for the front of the boat: trolling motors, the sonar that goes on or near them, the graphs that show it, and the brackets and poles that hold it all. Four bow mounts make up the motor side of the shop. Two are Garmin, two are Lowrance, and all four are brushless with GPS.

Below is what to check before you order: which motor suits your electronics, how to size it, and where the sonar and graph will mount.

Read the full buying notesShow less

The four motors at a glance

MotorPriceWorth knowing
Garmin Force Pro$4,199.99Multiband GPS. Scissor-style mount with a pull cable and gas springs. Comes with a weedless and a high-efficiency prop.
Garmin Force Kraken$3,999.99Black or white. Corrosion-resistant build for fresh or salt water.
Lowrance Recon$3,669.9924V or 36V. FreeSteer joystick remote with a color screen. Lifetime shaft warranty from Lowrance.
Lowrance Ghost$3,199.00Very quiet. Takes the HDI sonar nosecone ($199).

All four do anchor lock and heading hold. The real differences are which electronics they talk to, how you steer them, and how much you want to spend.

Garmin trolling motor or Lowrance trolling motor?

Start with the graph you already own. A Garmin trolling motor connects to Garmin chartplotters, so you can set anchor lock, steer and change speed from the screen. If you run LiveScope, it also makes sense to stay with Garmin because the Spy Pole has its own Force Pro mounting plate ($299.99).

If your dash has a Lowrance HDS on it, look at a Lowrance trolling motor. The Ghost is the quiet one and the cheaper of the two. The Recon costs more but adds the FreeSteer remote, which can jog the boat diagonally, plus 24V or 36V options and NMEA 2000.

Running Humminbird? Their sonar isn’t tied to one motor brand. We stock MEGA 360 mounts cut for the Kraken, Recon, Terrova and Power-Pole Move PV, so you can keep your Humminbird screens and still pick any motor here.

Between the two Garmins, the Force Pro is built around its scissor mount and multiband GPS. The Kraken is the pick when the boat sees salt, or when you want a white motor on a white boat.

Sizing a bow mount trolling motor

Two numbers matter: thrust and shaft length.

For thrust, the usual rule is about 2 lb for every 100 lb of loaded boat. An 18 ft boat that weighs 2,500 lb with fuel, batteries and two anglers works out to around 50 lb. That is a minimum. If you fish big water or wind, go up, which usually also means moving from 24V to 36V.

For shaft length, measure from where the mount bolts down to the waterline, then add about 20 inches. The prop needs to stay under when the bow rises in a chop. A bow mount trolling motor with too short a shaft will cavitate and lose its grip on a spot, which defeats the point of anchor lock.

Then think about how you like to steer. Some anglers want a foot pedal because both hands stay on the rod. Others prefer a wireless remote so they can move around the deck, or steer from the graph when they are following a contour. The Garmin motors can be run from a Garmin chartplotter, and the Lowrance Recon comes with the FreeSteer joystick remote. Live Sweep runs from its own pedals, wired ($127) or wireless ($145), so the pole and the motor each have their own controls.

Send us your boat make, model and length if you want a second opinion. It is quicker for us to check than for you to send a motor back.

Garmin Force Pro trolling motor stowed on its scissor mount
Stowing a Force ProThe scissor mount uses a pull cable and two gas springs, so it folds up without much effort.

Where the live sonar goes

Live sonar shows fish and your bait in real time. Most people fish it from the bow, which means the transducer has to live somewhere near the trolling motor. You have three choices.

On the motor shaft. The transducer turns with the motor, so it points wherever the motor points. It is simple and cheap, but you can’t look one way while the motor pulls another.

Inside the motor. The Lowrance HDI nosecone puts sonar into the Ghost’s lower unit. No extra brackets or cables on the shaft.

On its own pole. A pole lets you aim the transducer separately. The Garmin Spy Pole ($1,999.99) is motorized and works from a wireless remote or foot control. Live Sweep does a similar job and runs from foot pedals. We stock 34 Live Sweep products, including hardware for Garmin Force, Maxxum and Fortrex motors.

For the sonar itself, we carry Garmin LiveScope XR ($2,999.99, rated to 500 ft in fresh water), Humminbird MEGA Live 2 ($1,599.99) and Lowrance ActiveTarget 2 ($1,399.99). Check that your graph supports the system before you order.

Three ways people set up the bow

These are starting points, priced at what they cost in the shop today. Swap any piece for the size or model that suits your boat.

SetupMotorSonarExtras
All GarminForce Pro, $4,199.99LiveScope XR, $2,999.99Spy Pole $1,999.99 and Force Pro plate $299.99
All LowranceGhost, $3,199.00ActiveTarget 2, $1,399.99HDI nosecone $199 and HDS16 Pro $4,899.99
Humminbird sonarKraken or ReconMEGA 360 bundle, $1,788.99APEX 19 $5,299.99

In the Garmin setup, the Spy Pole bolts to the Force Pro with its own plate and aims LiveScope separately from the motor. The Lowrance setup keeps the sonar inside the motor and the screen on the dash. The Humminbird route works with either motor family, because the MEGA 360 bundle includes a mount made for your motor.

Graphs

There are 54 graphs in the shop, from 16-inch combos up to the 27-inch Garmin GPSMAP 9227 ($17,199.99). Popular sizes for the bow include the ECHOMAP Ultra 2 166sv ($4,799.99), the Lowrance HDS16 Pro ($4,899.99) and the Humminbird APEX 19 ($5,299.99).

Bigger is easier to read when you are watching live sonar standing up, but it also needs a stronger mount. Plan the two together.

Trolling motor mount and graph mount hardware

Most of our mounts are CNC-machined aluminum with a black anodized finish and stainless bolts. There are 48 transducer mounts and 43 electronics mounts in stock.

  • Telescoping swivel mounts raise a graph to eye level and turn at the base to cut glare.
  • Single, double and triple bridges hold more than one screen side by side.
  • Over-the-side mounts put a transducer pole on the gunnel when there is no room at the bow.
  • A trolling motor mount slide, kickstand rest or bounce eliminator kit takes some of the beating out of rough runs.

The telescoping plates fit every graph we sell except the Helix 7, which needs a $49 adapter bracket.

Over the Side Off Shore Mount fitted to a boat gunnel
Over The Side Off Shore MountA transducer pole that mounts on the gunnel. $389.

Props, nosecones and other trolling motor parts

Garmin ships the Force Pro with two props. The weedless prop ($99.99) is for grass, pads and timber, where it sheds weeds instead of wrapping them. The high-efficiency prop ($99.99) is for open water and gets more run time out of the batteries. It is worth keeping both in the boat and swapping them to suit the water.

We also carry Garmin skegs ($29.99) and nose cones in black ($89.99), white ($119.99) and a GT transducer version ($99.99). For Lowrance motors there are 12 accessories, including the HDI nosecone for the Ghost.

A bent skeg or chewed prop is a cheap fix compared with the damage it can cause if you keep running it, so it is worth checking both after a hard hit.

Rod storage at the front deck

When you are moving spot to spot every few minutes, rods lying on the deck slow you down. Our launch pads hold rods upright where you can grab them. The 8 Pole Launch Pad ($144) is 11½ by 5¾ by 7¼ inches, machined from Sea Board plastic with 6061 aluminum spacers and stainless hardware. It screws to the floor or drops into a 3/4 inch or Ranger 1.77 pedestal hole. Deck hardware is not included.

The 4 Pole Launch Pad ($76) does the same job on a smaller deck, and the Rod Leaner ($20) keeps one rod up and out of the way.

Speakers, seats and SeaArk parts

A few things in the shop are not about boat control at all. We carry Turtlebox speakers: the Ranger ($250), the Cub ($330), the Original Gen 3 ($430) and the Grande ($730). There are Millenium seat accessories, including a cup holder, and a graph cup holder ($35) that clips near the screen.

SeaArk owners will find 14 parts made for their boats, such as single and double console mounts and gunnel rail plates for over-the-side mounts and rod racks.

Batteries and wiring

A strong motor on weak power runs out by lunch. Match the battery bank to the motor’s voltage, keep cable runs short and use the gauge and breaker the motor maker lists. Lithium batteries save weight and hold their voltage longer through the day.

From us you can get a battery terminal set ($99.99) and a Wire Puck ($46) to bring cables through the deck cleanly.

Bundles and scratch & dent

The Humminbird MEGA 360 bundles are $1,788.99, which is $100 less than buying the transducer and mount on their own. Each one comes with the mount for a specific motor, so pick the one that matches yours.

Scratch & dent mounts start at $88. They have cosmetic marks such as scratches, nicks or uneven color, and they are sold as is with no returns.

Questions we get a lot

Which trolling motors do you carry?

The Garmin Force Pro, Garmin Force Kraken, Lowrance Recon and Lowrance Ghost, plus props, nosecones, skegs and mounting parts for them. Everything is on the trolling motors for sale page.

Can I return electronics?

No. Electronics sales are final, and the manufacturer handles the warranty. Register the unit with Garmin, Lowrance or Humminbird once it arrives.

Do you sell mounts for Minn Kota motors?

Yes. We have MEGA 360 mounts for the Terrova and Live Sweep hardware for the Maxxum and Fortrex. We don’t sell Minn Kota motors themselves.

Can I buy parts for a motor I already own?

Yes. Props, skegs, nosecones, pedals and mounting hardware are all sold one at a time.

How long should my trolling motor shaft be?

Measure from the mount to the waterline and add about 20 inches. Go longer for a tall bow or rough water.

What does scratch & dent mean?

The part works, but the finish has marks such as scratches, nicks or uneven color. Scratch & dent items start at $88 and are sold as is, with no returns.

What is your return policy?

Unused non-electronic items can come back within 30 days of delivery. Electronics and scratch & dent items are final sale. The full details are on our refund and returns policy page.

How do I reach you?

Email sales@trollingmotorsdirect.org. We’re in Monday to Friday, 9am to 6pm.

Trolling Motors Direct emblem

Not sure what fits your boat?

Email us your boat, motor and graph. We will check shaft length, mounts and transducer fit before you order.

Opening hoursMonday to Friday, 9am to 6pm
WarrantyElectronics are covered by their manufacturer
error: Content is protected !!