Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Bridge Mount – 12″ Foot Pedal Span – Limited Quantity Available

Price range: $159.00 through $182.00

A narrower version of our bridge: 1/2″ thick 6061 aluminum, 12″ inside and 5″ tall, with 6″, 7″ or 8″ legs available. Tapped for most graph mounts except Helix 7. Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The 12 inch span bridge mount is our standard bridge made an inch narrower, for decks where a 13″ bridge won’t fit around the foot pedal. It’s 1/2″ thick 6061 high strength aluminum, 12″ inside and 5″ tall, with 6″, 7″ or 8″ legs available. This span is a limited quantity item.

When the 12″ span makes sense

Some bow decks have a recessed pedal tray, a hatch lid or a cleat right where a 13″ bridge’s legs would land. Losing an inch of span can be the difference between bolting to flat deck and bolting to the edge of a lid. If the standard 13″ bridge mount fits your boat, that’s the easier one to get; if it doesn’t, this is the next thing to measure.

Measure the widest part of your foot pedal, including where the cord exits, and leave a little room on each side for your foot to rock it.

What bolts to the 12 inch span bridge mount

It pairs with our double mount or single deck mount, and every machined mount we sell bolts to it directly with one exception: the swivel telescoping mounts. Those need an extra bridge adaptor plate, the telescoping swivel mount bridge adaptor/deck plate.

The holes are tapped for nearly every graph setup. The Humminbird HELIX 7 is the exception and needs its adaptor plate, which is sold separately.

12 inch span bridge mount in aluminum, shown with standard legs

Legs and stance

Standard legs are 5″. You can also order 6″, 7″ or 8″ legs if you need more room under the bridge or want the screen higher. Like our other bridges, it gives taller mounts a sturdier, wider stance than a mount bolted straight to the deck.

Aluminum decks

For aluminum deck installs we recommend two add-ons for more stability and less flex: the Bridge Multi Mount Plates and the Bridge Under Plate. Deck mounting hardware isn’t included with the bridge, so pick fasteners that suit your deck’s thickness.

Installing it

Set the pedal where it’ll live, place the 12 inch span bridge mount over it and press the pedal through its full travel. If the toe or heel touches a leg, move the bridge or step up to a wider span. Once it clears, mark the feet, check under the deck for wiring, then drill and seal each hole.

Questions

Is the 12 inch span bridge mount the same as the 13″ one otherwise?

Same 1/2″ 6061 aluminum and 5″ standard height. The inside span is 12″ instead of 13″, and the swivel telescoping mounts can go on with the adaptor plate.

Do the taller legs change the span?

No. Leg height changes how tall the bridge stands, not the 12″ inside width.

See more in our bridge mounts section. Email sales@trollingmotorsdirect.org with your pedal width and deck photos, and we’ll tell you which span fits.

Additional information

Bridge Leg Height

5", 6", 7", 8"

Related products

error: Content is protected !!