Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

LVS34 Knob

$25.00

Heavy duty black anodized aluminum knob with stainless hardware and washer that replaces the plastic knob on a Garmin LVS34. Made in the USA. Not compatible with the EZ Drift LVS34 hood.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This LVS34 knob is a heavy duty aluminum replacement for the plastic knob on a Garmin LVS34. It’s black anodized, comes with stainless steel hardware and a washer, and it’s made in the USA.

What the knob does on an LVS34

Garmin’s LVS34 install guide has you attach the transducer to its mount with a knob, tighten it by hand, and loosen it whenever you change between the forward and down views. So it gets turned a lot, often with cold or wet hands, and the stock plastic knob takes all of that wear.

An aluminum replacement knob gives you something solid to grab and turn. If the plastic one is cracked, stripped or just feels like it’s about to give up, this is the fix. Anodizing builds a hard oxide layer into the aluminum surface instead of painting over it, so the black finish won’t flake off the way paint can.

LVS34 knob details

ItemDetail
ReplacesThe plastic knob on a Garmin LVS34
MaterialAluminum, black anodized
HardwareStainless steel, with washer
BuildHeavy duty
Made inUSA
Not compatible withEZ Drift Garmin LVS34 hood

The EZ Drift hood exception

If your transducer wears an EZ Drift Garmin LVS34 hood, this knob won’t work with it. You’ll need to choose one or the other, so check what’s on your transducer before you order.

Swapping it in

Support the transducer so it can’t drop while the knob is off, remove the plastic knob, and fit the aluminum one with the supplied stainless hardware and washer. Set your view and tighten it by hand, the same way Garmin describes for the original. It’s made to be loosened every time you change views, so there’s no need to put a wrench on it. Keep the old plastic knob in your boat bag as a backup.

For the transducer itself, see our Garmin LVS34 listing, and for more mounting parts, browse the Live View mounts. Unused non-electronic parts can be returned within 30 days per our returns policy, and a small part like this is easy to add to a larger order that qualifies for free shipping at $199.

Questions

Does the LVS34 knob fit the LVS34-IF or LiveScope 2 transducers?

It’s sold as a replacement knob for the plastic knob on the Garmin LVS34. For any other model, email us before ordering and we’ll check.

Will it work with an EZ Drift hood?

No. It isn’t compatible with the EZ Drift Garmin LVS34 hood.

Is the LVS34 knob tool-free?

Yes, once it’s installed you tighten and loosen it by hand like the original.

If you can’t tell which knob or mount your transducer has, email a photo to sales@trollingmotorsdirect.org and we’ll tell you if this is the right part.

Related products

error: Content is protected !!