Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin LVS34 Transducer

$1,299.99

LiveScope Plus LVS34 transducer only (010-02706-10). Needs a GLS 10 sonar black box and a compatible Garmin chartplotter. Forward, Down and Perspective modes, 200 ft range, perspective mount and trolling motor barrel mount included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Garmin LVS34 transducer is the LiveScope Plus transducer sold on its own, for anglers who already run a GLS 10 sonar black box. Part number 010-02706-10 lets you upgrade an existing LiveScope system by swapping only the transducer. Garmin rates it for better resolution and target separation than the original LiveScope, with less noise and fewer sonar artifacts.

What you need to run it

This is transducer only. It needs a GLS 10 sonar module and a compatible Garmin chartplotter. The electrical figures on the spec sheet match the GLS 10: 10 to 32 V input, 21 W typical and 58 W max, on a 7.5 A fuse, with one Garmin Marine Network port (small connector).

A built-in stabilization system keeps the image steady on the chartplotter even in rough water, and you can choose from seven color palettes, including Aqua, Caribbean and Lava, for contrast.

Forward, Down and Perspective on the Garmin LVS34 transducer

Forward mode looks out ahead of the transducer, so you can watch a lure fall toward a fish you’ve already spotted. Down shows a live slice straight under the boat, which helps when you’re sitting over brush or a school. Perspective tilts the view to look out and around the boat from above, and it’s most useful in shallow water.

Garmin LVS34 transducer specs

ItemSpec
Frequency530 to 1,100 kHz
Maximum depth200 ft, Down and Forward
Minimum depth3 ft
Beamwidth20 x 135 degrees
Transmit power500 W
Cable20 ft, 21 pins
Size and weight6.4 x 3.1 x 1.9 in; 2.25 lb
Operating temperature0 to 40°C
Compass-safe distance4 in

Box contents and mounting

  • LVS34 transducer
  • Perspective mount
  • Trolling motor barrel mount
  • Documentation

The barrel mount covers Forward and Down on a trolling motor shaft, and the perspective mount is there for Perspective mode. Garmin’s LVS34 installation instructions cover the mounting steps. Keep the cable clear of the prop and leave slack at the steering joint.

Before ordering, check the label on your black box says GLS 10, update your chartplotter software, and measure your trolling motor shaft so you know how the mount will sit. We also stock the EZ Drift LVS34 hood and a replacement LVS34 knob. Ice anglers want the LVS34-IF instead, with its cold-weather cable and pole mount.

Questions

Does the Garmin LVS34 transducer work without a GLS 10?

No. LiveScope Plus needs the GLS 10 black box between the transducer and the chartplotter.

Is it the same as LiveScope 2?

No. LiveScope 2 transducers like the LVS44 connect without a black box and use different cables.

Can I return it?

Transducers are final sale under our returns policy, so check your GLS 10 and chartplotter first.

See more Garmin transducers, or email sales@trollingmotorsdirect.org with your black box, chartplotter and trolling motor, and we’ll confirm the Garmin LVS34 transducer fits your setup.

Related products

error: Content is protected !!