Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Console Track Shelf Mount – Scratch & Dent

Price range: $504.00 through $515.00

Our double console mount for behind the steering wheel, with cosmetic marks in the finish. Same choice of 8 or 10 inch arm and 15 or 18 inch track. Sold as is, final sale.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 681-SD
Category: ,

Description

This console track shelf mount scratch and dent listing is the same double console mount we sell new, with something off in the finish. It goes behind the steering wheel and carries two graphs. If a mark on the anodizing won’t bother you, it’s the cheaper way to get one.

What to expect from a console track shelf mount scratch and dent unit

These mounts have cosmetic problems that keep them out of new stock. Yours may show one or more of these:

  • scratches in the finish
  • machining defects in the finish
  • color defects in the anodizing
  • nicks in the finish

Every item on that list is a finish problem. The design, the anodized aluminum and the stainless steel hardware are the same as the new one, and it’s made in the USA.

The anodized layer is grown out of the aluminum surface rather than painted on (Wikipedia has a short explainer on anodizing). That’s why a color defect or a light machining mark looks the way it does: it’s in the surface finish, not a coat that will peel off later.

Console track shelf mount scratch and dent, listing photo of the double console mount

Sold as is

Every console track shelf mount scratch and dent unit is sold as is, with no returns or refunds. That’s different from our normal 30-day return on unused non-electronic parts, so measure before you order. Our returns page has the full policy.

Arm and track choices

You get the same four combinations as the new mount:

  • Arm length: 8 or 10 inch. Check the clearance between the screens, the wheel and the windshield.
  • Track length: 15 or 18 inch. Measure the flat area of console behind the wheel.

Hardware to fasten it to the console isn’t included. Use stainless fasteners sized for your console, and through-bolt where you can reach the back side. Because the mount adjusts a lot, rough it in first, then set the final angle from the driver’s seat.

Same double console mount underneath

Apart from the finish, nothing changes. The knobs have holes for our knob tool if you want them snugger than you can get by hand. If you’d rather have a clean finish, the new console track shelf mount is the same part at full price.

Questions

Does it work like a new one?

The defects listed are all in the finish: scratches, machining marks, color problems or nicks. The mount itself is the same design and materials.

Can I return it if it doesn’t fit?

No. Scratch and dent is final sale, so measure your console first.

Where are the other discounted parts?

Everything with cosmetic flaws is in our scratch and dent section.

Before you buy a console track shelf mount scratch and dent unit, email sales@trollingmotorsdirect.org with your console measurements and graph models, and we’ll tell you which arm and track to pick.

Additional information

Arm Length

8", 10"

Track Length

15", 18"

Related products

error: Content is protected !!