Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Trolling Motors

MotorGuide trolling motor guide: Tour Pro, Xi5, Xi3 and the rest, model by model

The current MotorGuide range with verified specs, cable steer vs wireless, Pinpoint GPS and HD+ sonar, and which Tour years our mounts fit.

13 min read

MotorGuide Tour MEGA 360 clamp, black powder coated aluminum dog bone style clamp with stainless bolts

A MotorGuide trolling motor today comes from one of seven series on MotorGuide’s own store: the Tour Pro and Tour (cable-steer bow mounts), the Xi5 and Xi3 (wireless bow mounts), the X3 (a cable-steer or hand-control bow mount), and the R3 and R5 transom motors. Pick the Tour Pro for a cable pedal with GPS anchoring, the Xi5 for wireless steering on a bigger boat, and the Xi3 for smaller boats, pontoons and kayaks.

We don’t sell MotorGuide motors. We sell machined mounts that fit some of them, plus the graphs and live sonar that go with them. The specs here come from motorguide.com and MotorGuide’s online store as they read in October 2026. MotorGuide’s store doesn’t show prices, so we don’t either.

The MotorGuide trolling motor lineup in 2026

MotorGuide’s store lists 66 freshwater and 20 saltwater motors. Each listing name spells out the series, thrust, shaft length and whether it has Pinpoint GPS or sonar.

Freshwater models

SeriesSteeringThrust and voltsShaft lengths
Tour ProCable steer, foot pedal, Pinpoint GPS82 lb (24V), 109 lb (36V)45 in
TourCable steer, foot pedal82 lb (24V), 109 lb (36V)45 in
Xi5Wireless electric steer, Pinpoint GPS55 lb (12V), 80 lb (24V), 105 lb (36V)45, 48, 54, 60, 72 in
Xi3Wireless electric steer45 or 55 lb (12V), 70 lb (24V); pontoon 54 and 68 lb36, 48, 54, 60 in
X3Cable steer pedal or hand tiller45 or 55 lb (12V), 70 lb (24V)36, 45, 50 in
R3 (transom)Hand tiller30 to 55 lb (12V)30, 36, 42 in
R5 (transom)Hand tiller70 or 80 lb (24V), 105 lb (36V)42 in

Not every thrust comes in every length. On the freshwater Xi5, the 55 lb motor comes on 48 and 54 inch shafts, the 80 lb on 45, 54, 60 and 72, and the 105 lb on 48, 54, 60 and 72. Voltages come from MotorGuide’s spec tables and store filters.

Saltwater models

  • Xi5 Saltwater: every listing has Pinpoint GPS. 55 lb (54 inch), 80 lb (48, 60 or 72 inch) or 105 lb (60 or 72 inch).
  • Xi3 Saltwater: 55 lb on 36, 48 or 54 inch shafts and 70 lb on 54 or 60 inch, most with Pinpoint GPS.
  • X3 Digital Saltwater: a hand-control bow mount, 55 or 70 lb on a 50 inch shaft.
  • R3 and R5 Digital Saltwater: transom motors. The R3 is 45 or 55 lb on 36 inches. The R5 is 80 lb on 42 inches or 105 lb on 50 inches.

There’s no Tour or Tour Pro in the saltwater list. MotorGuide’s store tags most of its saltwater motors for bay boats, center consoles, skiffs and flats boats.

The R3 and R5 transom motors

The R3 covers small boats on 12V, from a 30 lb motor on a 30 inch shaft up to 55 lb on 42 inches. The R5 is the bigger transom MotorGuide trolling motor, at 70, 80 or 105 lb on a 42 inch shaft in freshwater trim.

MotorGuide’s R5 spec page lists an aluminum alloy bracket with stainless hinge pins, an extendable twist tiller, a head that reverses for bow or backtrolling, and a 3-blade Machete prop. The R5 Digital also lists digital variable speed and MotorGuide’s Digital Power Management.

MotorGuide Tour Pro and Tour: cable steer

MotorGuide’s site presents an “All New Tour Series” under the line “The Tour is back.” Both motors use what MotorGuide calls true cable steering, where the foot pedal connects to the head through steering cables. The difference is GPS. Every MotorGuide Tour Pro listing includes Pinpoint GPS, and no Tour listing does.

Both come in 82 lb on 24V or 109 lb on 36V, and every current listing has a 45 inch shaft. Each is offered with or without HD+ universal sonar. On a high bow, check that 45 inches is enough before you buy. Our bow mount guide has the measuring steps.

What the Tour series shares

  • Zero-G lift assist: MotorGuide says it takes 40% less effort to stow and deploy than competitors’ assist mounts. Patented Bulldog latches hold it down.
  • Shaft: an oversized metal outer column over a composite inner shaft, and the inner shaft has a lifetime warranty.
  • Mount: a 360 degree breakaway mount.
  • Prop: a two-blade Katana as standard. Tour motors take MotorGuide props with a 3.5 inch hub, including the Machete.
  • Pedal: no-flex metal. MotorGuide lists the Tour Pro pedal at 5.05 x 9.16 x 14.43 inches and the Tour pedal at 5.05 x 8.5 x 14.43 inches, which matters if you run a recessed pedal tray.
  • Warranty: 3 years on the trolling motor, per MotorGuide’s Tour pages.
  • Batteries: listed as lithium-ion compatible.

Extras on the MotorGuide Tour Pro

The MotorGuide Tour Pro adds Pinpoint GPS with Wireless GPS Control as standard, push-button Anchor and Heading Lock, and an LED dashboard that shows power, battery and GPS status. MotorGuide’s Tour Pro page calls it “the only true cable steer with GPS anchor.” It can also be networked over NMEA 2000 with a Lowrance or Simrad display.

Care notes from MotorGuide’s FAQ

  • After each trip: unplug the 24/36V DC port or trip the breaker, and check the prop and shaft for debris.
  • Every 100 hours or once a year: grease the latch hooks and strikers. MotorGuide’s part for that is Tour Latch Grease (8M4005246).
  • Cables: keep the head square to the mount and lay the cables in a loose C shape with no sharp bends. Don’t put zip ties on the steering cables.
  • Winter: store it dry and above -20°F. If it’s been stored below 32°F, run it slowly for the first 15 minutes.

MotorGuide also says its Universal Quick Release Bracket fits the Tour series and most competitor hole patterns, which helps if you’re swapping a MotorGuide trolling motor onto a boat drilled for another brand.

Which Tour you have matters for mounts

Our Tour mounts are listed for Tour and Tour Pro motors from 2023 and older. MotorGuide’s pages don’t put a model year on the new series, so go by the date on your registration or receipt. If your trolling motor is newer than 2023, email us before you order a mount.

MotorGuide Xi5 and Xi3: wireless steering

MotorGuide Xi5

The MotorGuide Xi5 steers electrically, with no cable between pedal and head. Every current Xi5 listing, fresh or salt, includes Pinpoint GPS. The freshwater Xi5 adds built-in 83/200 kHz 2D sonar and comes with a wireless foot pedal. MotorGuide’s Xi5 page says it’s ready to use out of the box with the handheld remote.

Thrust runs 55 lb (12V), 80 lb (24V) or 105 lb (36V), and freshwater shafts go from 45 to 72 inches. MotorGuide backs the composite shaft with a lifetime warranty. A quick release bracket for the Xi series is sold as an accessory.

Xi3

The Xi3 is the smaller wireless motor, which MotorGuide calls “a no-nonsense, high value motor.” Remote steering works out of the box, and a wireless foot pedal is optional. It has SecureStep stowing, which MotorGuide says takes 50% less effort, plus Digital Power Management.

MotorGuide’s store has Xi3 versions with Pinpoint GPS and sonar, with one of them, or with neither, at 45 to 70 lb on 36 to 60 inch shafts. Two pontoon versions sit on a 48 inch shaft at 54 lb and 68 lb. GPS can be added later with the Pinpoint GPS Upgrade Kit (8M0092070), which MotorGuide lists for both the Xi3 and Xi5.

Xi3 kayak versions

For kayaks, MotorGuide sells the Xi3 on a 36 inch shaft at 55 lb and 12V. The freshwater kayak model comes with or without GPS, and the saltwater one has Pinpoint GPS as standard. The non-GPS model ships with a wireless remote and the GPS model with a Pinpoint GPS remote. A wireless pedal is optional, and the prop is a 3-blade Machete.

Cable steer vs wireless steer

This is the real choice between the Tour series and the Xi series. With cable steer, the pedal is tied to the head by steering cables. You feel the motor turn under your foot, and the pedal itself has nothing to charge.

With wireless steer, a motor in the head turns the shaft. You can steer from the pedal or the remote, from anywhere in the boat, and with Pinpoint GPS the trolling motor can hold a heading or a spot with nobody on the pedal. The trade-off is a remote you have to keep with you. MotorGuide’s Xi FAQ tells owners to always have it on board.

The MotorGuide Tour Pro sits between the two: a cable pedal for normal fishing, plus GPS anchoring and heading lock from push buttons and the wireless GPS control. If you’ve run cable steer for years and want GPS anchoring without giving up the pedal feel, that’s the one to look at.

MotorGuide’s X3 is the simplest bow mount in the range. Foot pedal versions are cable steer, and no X3 listing includes GPS. The hand-control X3 swaps the pedal for an extendable twist tiller.

How Pinpoint GPS works on a MotorGuide trolling motor

Pinpoint is MotorGuide’s GPS system. It gives you Anchor, Jog, Heading Lock and Cruise Control, and MotorGuide claims it’s 3 times more precise than competitors. Anchor holds the boat on a spot, and Heading Lock keeps it on a set heading while you troll.

MotorGuide’s Tour Series FAQs cover calibration step by step:

  1. Run the compass calibration, which takes two full circles. MotorGuide suggests doing it two or three times, and not using the trolling motor for propulsion while it runs.
  2. Run the keel calibration after moving the motor to a new boat. On the Tour Pro, a paired remote is needed for it.
  3. Recalibrate after you travel more than 250 miles from your last calibration point, or if anchoring gets less accurate.
  4. If the motor still won’t hold, check satellite signal, nearby bridges and interference, then run the pedal and sensor calibrations and adjust steering cable tension.

Connecting Pinpoint to a graph

MotorGuide’s FAQs only name Lowrance and Simrad displays for networking. The MotorGuide Tour Pro connects over NMEA 2000. The MotorGuide Xi5 and Xi3 need MotorGuide’s Gateway Kit (8M0092085) to join the network. Either way, MotorGuide says to power the NMEA 2000 network from a single switched 12V source.

We sell Lowrance HDS PRO units, and our HDS PRO 12 listing ($3,369.99) notes the Gateway requirement for Xi motors. On Garmin or Humminbird graphs you can still use the motor’s sonar with the right cable, but the GPS control features go through Lowrance or Simrad.

HD+ universal sonar and the adapter cables

HD+ universal sonar is built into the Tour series nose cone. MotorGuide lists 2D views at 83/200 kHz and high-definition views at 455/800 kHz. You add an adapter cable for your graph brand, so there’s no separate transducer cable to run down the shaft.

These are the adapters MotorGuide lists in its Tour series FAQ:

Graph and plugMotorGuide partUnits MotorGuide lists
Lowrance 9-pin8M4004174HDS Carbon, HDS Live, Elite Ti/Ti2, Elite FS
Lowrance 7-pin8M4004175HDS, HDS Gen 2, Gen 2T, Gen 3, HDS Carbon, Hook and Hook2
Humminbird 11-pin8M4004176SOLIX, ONIX
Humminbird 7-pin8M4004177HELIX, 500 to 1100 series
Garmin 8-pin8M4004178GPSMAP, ECHOMAP
Raymarine Element8M4004179Element series
Raymarine Axiom8M4004180Axiom series

MotorGuide notes that ECHOMAP units with a yellow transducer port need an extra Garmin cable, and Hook2 units need an extra Lowrance adapter. Newer graphs such as Humminbird XPLORE and APEX and Lowrance HDS PRO aren’t on that list, so ask MotorGuide before you count on HD+ with one.

The freshwater Xi5 uses its built-in 83/200 kHz 2D sonar instead. MotorGuide’s Xi FAQ lists 2D adapter cables for Lowrance 7-pin and 6-pin, Garmin 6-pin, Vexilar 3-pin and Humminbird 7-pin units.

Which MotorGuide trolling motor fits your boat

For thrust, the usual guide is about 2 lb for every 100 lb of loaded boat, with more for wind and current. Then match the series to how you fish:

  • Bass boat, cable pedal, GPS anchor: MotorGuide Tour Pro, 82 lb on 24V or 109 lb on 36V. Check the 45 inch shaft against your bow height.
  • Bass boat, cable pedal, no GPS: Tour, with or without HD+ sonar.
  • Deep-V or multi-species boat with a high bow: MotorGuide Xi5, which goes to 72 inches and includes GPS and sonar in freshwater trim.
  • Small aluminum boat on 12V: Xi3 for wireless steering, an X3 for a cable pedal or tiller on the bow, or an R3 on the transom.
  • Pontoon: the 54 lb or 68 lb Xi3 pontoon versions, or an X3 pontoon hand-control model.
  • Kayak: the Xi3 on the 36 inch shaft.
  • Salt water: Xi5 or Xi3 Saltwater for GPS and wireless steering on a bay boat or skiff. X3, R3 or R5 Digital Saltwater for hand control.

Our saltwater trolling motor guide has more on running a motor in salt.

Mounts we sell that fit a MotorGuide trolling motor

Our MotorGuide parts split by series. The Tour clamps are listed for 2023 and older Tour and Tour Pro motors, and the Xi series has fewer options. Electronics are final sale, so email sales@trollingmotorsdirect.org with your motor model and year before you order a mount.

Tour and Tour Pro, 2023 and older

MEGA 360 clamp made for a 2023 or older MotorGuide trolling motor (Tour and Tour Pro), black powder coated aluminum with stainless bolts
The MEGA 360 clamp for 2023 and older Tour and Tour Pro motors.

The MEGA 360 clamp for Tour and Tour Pro ($125) goes on the shaft and carries a Humminbird MEGA 360 alongside it. It’s CNC machined aluminum with stainless hardware, made in the USA. The 360 needs a compatible Humminbird graph to display on.

For live sonar, the Live Sweep with mounting hardware ($1,099) has a Tour option that mounts with a dog bone. If you’re moving a Live Sweep over from another motor, the Live Sweep Tour dog bone ($125) is sold alone. Our long and XL dog bones don’t fit the Tour.

Live Sweep MotorGuide Tour dog bone clamp viewed from above
The Tour dog bone joins a Live Sweep to a Tour or Tour Pro.

To turn the transducer by hand instead, the Cable Steer ($475) has a Tour/Tour Pro 2023 and older option. It needs no power: a knob at the graph turns a 10 foot cable that turns the transducer. The Switchback mount ($295) lists the Tour Pro too, and flips a Garmin LiveScope or Lowrance ActiveTarget transducer between Forward/Down and Perspective. Tell us your year and transducer before ordering it.

MotorGuide Xi5 and Xi3

The Live Sweep doesn’t fit the Xi5 or Xi3, and none of our MEGA 360 mounts list them. For a MotorGuide Xi3 or Xi5, freshwater or saltwater, the Live View transducer mount ($333) is on the options list. Both motors use the same 1-1/4 inch composite shaft. The mount clamps a LiveScope, MEGA Live or ActiveTarget transducer to the shaft, so it points wherever the trolling motor points. Its Xi option comes in 45, 54, 60 and 72 inch lengths, so email us first if your shaft is 36 or 48 inches.

That has a catch. When Pinpoint Anchor is holding the boat, the motor turns to correct, and the sonar view turns with it. On the motors it fits, the Live Sweep turns the transducer on its own arm, so the motor can hold its spot while you look around.

Live View transducer mount with machined clamps, aluminum tube and coiled hose on a bow trolling motor
The Live View mount lists the Xi3 and Xi5 among its motor options.

Two smaller parts list MotorGuide motors as well. The TotalScan trolling motor mount ($127) holds a Lowrance TotalScan or 3-in-1 transducer and fits most MotorGuide motors. The CABLE SAVE’R ($183) protects a down or side imaging transducer cable and lists the Xi3 and Xi5.

What we’d pick for each MotorGuide

On a 2023 or older MotorGuide Tour Pro, we’d put a Live Sweep with the Tour option on the shaft and run Lowrance ActiveTarget 2 ($1,399.99) on an HDS PRO. Lowrance is one of the two display brands MotorGuide names for networking the Tour Pro’s GPS, so check MotorGuide’s chart for your unit and one screen can cover both. Add the MEGA 360 clamp later if you want a 360 view on a Humminbird screen.

If money’s tighter, the Cable Steer gets you an aimable transducer on a 2023 or older Tour for less than half the Live Sweep’s price, with nothing to wire.

For a MotorGuide Xi3 or Xi5, the LiveScope Plus and Live View bundle pairs Garmin’s live sonar with the mount in one order. Our forward-facing sonar guide compares the systems. For a Tour newer than 2023, email us first so we can confirm the motor option. The rest of our motor-mounted options are under Live View mounts.

Gear in this guide

Questions about MotorGuide trolling motors

Is the MotorGuide Xi5 worth it over the Xi3?

On a bigger boat, usually. The freshwater Xi5 includes Pinpoint GPS, built-in sonar and a wireless pedal, goes up to 105 lb on 36V, and offers shafts to 72 inches. The Xi3 tops out at 70 lb and 60 inches, and GPS, sonar and the pedal are separate versions or add-ons. On a small boat or a kayak, the Xi3 is enough.

What’s the difference between the MotorGuide Tour Pro and the Tour?

GPS. The Tour Pro has Pinpoint GPS with Anchor, Heading Lock and wireless GPS control, plus an LED status dashboard. The Tour shares the cable steering, lift assist, shaft and thrust options, but has no GPS.

Will your MEGA 360 clamp fit a 2025 Tour Pro?

It’s listed for Tour and Tour Pro motors from 2023 and older. For anything newer, email us your model year and a photo of the motor, and we’ll check before you order.

Does a MotorGuide trolling motor work with a Garmin or Humminbird graph?

For sonar, yes on the units MotorGuide lists, with the right adapter cable. For GPS control from the screen, MotorGuide’s FAQs only name Lowrance and Simrad displays.

Is there a saltwater MotorGuide Tour Pro?

Not on the current store. The saltwater list has the Xi5, Xi3, X3, R3 and R5.

What warranty comes with a MotorGuide trolling motor?

MotorGuide’s Tour and Tour Pro pages list a 3 year warranty. The composite inner shaft on the Tour series, Xi5 and X3 carries a lifetime warranty. We didn’t find full warranty terms for the other series on MotorGuide’s pages, so check with MotorGuide or your dealer.

Email sales@trollingmotorsdirect.org (Monday to Friday, 9am to 6pm) with your MotorGuide trolling motor model, year and shaft length, plus your graph, and we’ll tell you which mount fits.

Keep reading

More guides

See all guides

error: Content is protected !!