Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

MEGA 360 Clamp for 2023 and older Motorguide Tour/Pro Tour

$125.00

CNC machined aluminum clamp for mounting a Humminbird MEGA 360 to a 2023 or older MotorGuide Tour or Pro Tour trolling motor. Black powder coat, stainless steel hardware, made in the USA.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Our MotorGuide Tour MEGA 360 clamp mounts a Humminbird MEGA 360 to a 2023 or older MotorGuide Tour or Pro Tour trolling motor. It’s CNC machined aluminum with a black powder coat, stainless steel hardware, and it’s made in the USA.

Which Tour motors it’s for

The model year matters here. This clamp is listed for Tour and Pro Tour motors from 2023 and earlier. MotorGuide has since brought out a new Tour series, and you can see the current lineup on MotorGuide’s Tour page. If your motor is newer than 2023, email us before ordering so we can check the fit.

Your model year should be on the registration, the receipt or the label on the motor. If you bought the boat used and the paperwork is gone, a couple of clear photos of the motor head and shaft are usually enough for us to tell.

What the MotorGuide Tour MEGA 360 clamp does

The clamp goes on the Tour’s shaft and carries the 360’s shaft alongside it, so the Humminbird MEGA 360 rides on the trolling motor instead of needing its own pole or bracket on the deck.

If you also run a Live Sweep on the same motor, there’s a matching Live Sweep Tour dog bone. Plan where each one sits on the shaft before you tighten anything so they don’t crowd each other when the motor stows.

Specs

  • Fits: MotorGuide Tour and Pro Tour, 2023 and older
  • Holds: Humminbird MEGA 360
  • Material: CNC machined aluminum
  • Finish: black powder coat
  • Hardware: stainless steel
  • Made in the USA

Fitting tips

Set the MotorGuide Tour MEGA 360 clamp with the motor deployed, snug the bolts, then stow and deploy a few times to make sure the 360 clears the deck, the bow and the motor’s own mount. Only then tighten fully. On salt water, a thin coat of anti-seize on the stainless threads makes the clamp easier to move or remove later. The 360 Imaging section of Minn Kota’s Humminbird Imaging page is a quick refresher on what the 360 view shows once it’s mounted.

Unused, it’s returnable within 30 days under our returns policy. Clamps and brackets for other motors are in our MEGA 360 mounts.

Questions

Is the MotorGuide Tour MEGA 360 clamp everything I need to mount my 360?

It’s the clamp that attaches the 360 to a Tour or Pro Tour. Every boat is a little different, so email us your motor year, shaft length and 360 model and we’ll confirm what the full install needs.

Will it fit a 2024 or newer Tour?

It’s listed for 2023 and older motors. For anything newer, check with us first.

For help with your Tour, email sales@trollingmotorsdirect.org with the model year, shaft length and a photo of the motor, and we’ll give you a straight answer.

Related products

error: Content is protected !!