Description
Twist a knob at the graph and your live view transducer turns: that’s the Cable Steer transducer mount in one line. There’s nothing to wire: an easy grip knob turns a 10′ corrosion resistant cable, and the cable turns the transducer. It mounts to most popular bow motors, or off the deck on one of our over the side mounts.
How the Cable Steer works
The knob mounts to the gimbal plate of your live view graph, on the left or right side. Turn it and the transducer follows, so you can fine tune the view without touching the trolling motor. A neon green indicator arrow is included, so you can see at a glance which way the transducer points.
Mounted on the trolling motor, the transducer goes in and out of the water with the motor, so there’s no separate pole to deploy. The mount is aluminum with stainless steel hardware.
Cable Steer transducer mount options
| Choice | Options |
|---|---|
| Minn Kota | Ultrex port side, Ultrex starboard, Ultrex Quest port side, Ultrex Quest starboard, Fortrex, Maxxum |
| Other motors | Lowrance Ghost, Garmin Force, MotorGuide Tour/Tour Pro 2023 and older, Power Pole ZR |
| No Mount | The Cable Steer without motor hardware |
| Shaft length | 42″, 45″, 47″, 50″, 52″, 57″, 60″, 62″, 72″ |
For an Ultrex or Ultrex Quest, choose the side you want it on. Match the shaft length to your trolling motor; it’s on the motor’s label or in its model name. Every Cable Steer transducer mount with a motor option comes set up for that motor, so the shaft length is the main thing to get right.
Off the deck instead
If the motor isn’t the right place, the Cable Steer also works from the deck with the Over The Side Mount, the telescoping tall or telescoping short mount, or the Over The Side Off Shore Mount. Ask us whether to pick the No Mount option for that setup.
Before you order
- Check the 10′ cable reaches from the transducer position to your graph with some slack.
- Decide which side of the graph the knob goes on, so it doesn’t foul the screen or your other controls.
- Your live view transducer is not included. Garmin’s LiveScope 2 announcement covers one of the current options.
Cable Steer questions
Does the Cable Steer transducer mount need power?
No. It’s turned by hand with the knob and cable, which is the main difference from the 12 volt Live Sweep. If you’d rather sweep from a pedal, look at the Live Sweep instead.
Can I get a spare arrow?
Yes, the green arrow for Cable Steer is sold separately in two shaft sizes.
Does it fit a newer MotorGuide Tour?
The Tour option is listed for 2023 and older models. Email us about anything newer.
See all parts under Cable Steer mounts, or email sales@trollingmotorsdirect.org with your motor, shaft length, graph and transducer and we’ll confirm the setup.












