Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

TotalScan Transducer Trolling Motor Mount

$127.00

Mounts a Lowrance TotalScan or Lowrance 3 in 1 transducer on your trolling motor for side scan, down scan and 2D sonar at the bow. Fits most Minn Kota and MotorGuide motors; does not fit Minn Kota Quest series.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The TotalScan transducer trolling motor mount puts a Lowrance TotalScan or Lowrance 3 in 1 transducer on your trolling motor, so the bow graph gets side scan, down scan and 2D sonar. It fits most Minn Kota and MotorGuide trolling motors. It does not fit Minn Kota’s Quest series.

Why put imaging on the trolling motor

A transom transducer shows you what the back of the boat is passing over. When you’re fishing from the front deck, that’s already behind you. Mounting the TotalScan on the trolling motor puts side scan and down scan under your feet, on the graph you’re actually watching.

A TotalScan transducer trolling motor mount also means the imaging moves with the motor. When you turn the boat with the trolling motor, the view turns with it, which makes it easier to line up on what you just marked.

TotalScan transducer trolling motor mount fit

ItemDetail
TransducerLowrance TotalScan or Lowrance 3 in 1 only
MotorsMost Minn Kota and MotorGuide trolling motors
Not compatibleMinn Kota Quest series
Cable protectionCable Save’R, sold separately

We say “most” because motors vary, so if you run an older or less common motor, send us the model before ordering. Garmin and Lowrance motors aren’t mentioned in the fit notes. Minn Kota’s trolling motor range and the MotorGuide site are handy for checking which model you have.

Protect the cable

Transducer cables on a trolling motor take a beating from stowing and deploying, and from rubbing against the shaft. Pair this mount with the Cable Save’R cable protection, which is made for down and side imaging transducers.

Fit the mount and transducer with the motor deployed, then stow and deploy it a few times to make sure the transducer doesn’t hit the hull or the bracket. Route the cable up the shaft with some slack at the motor head so steering doesn’t pull on it, and secure it so it can’t get pinched when the motor stows. Plan the whole cable run back to the bow graph before you drill anything.

For help picking the graph at the bow, see our Lowrance fish finder guide. Other mounts for this transducer are under TotalScan mounts.

Questions

Will the TotalScan transducer trolling motor mount fit a Terrova Quest or Ultrex Quest?

No. It doesn’t fit Minn Kota Quest series motors.

Does it hold other Lowrance transducers?

It’s listed for the TotalScan and the Lowrance 3 in 1 only. For anything else, email us first.

Is the transducer included?

No. It’s the mount only. Transducers are electronics and are final sale in our shop, while an unused mount can be returned within 30 days under our returns policy.

Send your trolling motor model and transducer to sales@trollingmotorsdirect.org, and we’ll confirm the fit before you order.

Related products

error: Content is protected !!