Description
The Garmin GLS 10 sonar module is the black box that sits between a LiveScope transducer and your chartplotter. The transducer sends its signal to the module, and the module puts the live scanning picture on your screen over the Garmin Marine Network. It’s Garmin part 010-12954-00, and it does not include a transducer.
What the module does
Garmin built LiveScope around a separate sonar box that plugs into the network. Pair the Garmin GLS 10 sonar module with an LVS32 transducer and you see structure, bait and fish moving below and around the boat in real time. Because it’s on the network, more than one networked chartplotter can show the same live image.
We mostly sell it as a replacement for a failed or damaged module in an existing LiveScope system. The listing calls for an LVS32. Garmin’s LiveScope Plus LVS34 install manual also wires its transducer to this same module, so LVS34 owners replacing a unit are covered too. Our LVS34 transducer page has the current transducer.
Garmin GLS 10 sonar module specs
| Spec | GLS 10 |
|---|---|
| Size | 9.6 x 5.9 x 2.6 in (24.5 x 14.9 x 6.5 cm) |
| Weight | 4.3 lb (2.0 kg) |
| Water rating | IPX7 |
| Network ports | 1 Garmin Marine Network (small connector) |
| Frequencies | 530 to 1,100 kHz |
| Transmit power | 500 W |
| Max depth | 200 ft (61 m), down and forward |
| Power input | 10 to 32 V |
| Power use | 21 W typical, 58 W max |
| Fuse | 7.5 A |
| Operating temperature | -15 to 70 C |
What comes with it
- GLS 10 sonar module
- Power cable
- 2 m Garmin Marine Network cable, small connector
- Network adapter cable
- Mounting hardware and documentation
Install notes from Garmin’s manual
The LiveScope Plus installation manual covers wiring this black box. The points people miss:
- Common ground: the module and the chartplotter must share the same ground.
- Fuse: the power cable uses a 7.5 A fuse. Garmin says not to remove it.
- Software: update the chartplotter software when you add the module.
- Location: somewhere ventilated, out of extreme heat, not submerged, with the LEDs visible.
- Power runs: the stock power cable is 9 ft. Garmin allows extending it up to 15 ft with 10 AWG, 23 ft with 8 AWG or 36 ft with 6 AWG wire.
- Fiberglass: countersink through the gel coat before driving screws so it doesn’t crack. The included screws may not suit every surface.
If the transducer cable won’t reach the module, Garmin’s 10 ft LiveScope extension and the other lengths are in Garmin transducers.
GLS 10 questions
Does it come with a transducer?
No. The Garmin GLS 10 sonar module ships without one. You need a LiveScope transducer such as the LVS32 named in the listing.
Can I return it if it’s the wrong part?
Electronics are final sale at our shop, per our returns policy. Check your system before you order, or ask us.
Where can I learn how LiveScope fits together?
Our Garmin LiveScope guide walks through transducers, modules and compatible screens.
Email sales@trollingmotorsdirect.org with your transducer and chartplotter models, Monday to Friday from 9am to 6pm, and we’ll confirm the GLS 10 matches your setup.









