Description
The Garmin GT36UHD-TM transducer is a scanning-only unit: Ultra High-Definition ClearVü looking down and SideVü looking out to both sides, with hardware to mount it on the transom or a trolling motor. Garmin part number 010-13072-00 runs at 455, 800 and 1,000 kHz, plugs in with a 12-pin connector and has a 25 ft cable. It doesn’t do traditional 2D sonar by itself, and that’s the main thing to understand before ordering.
Scanning sonar only
Garmin gives ClearVü a downward-facing element that puts more power on targets, so the picture of structure and fish stays clear deeper than other high-frequency scanning sonars. SideVü now has 20% more range at 1,000 kHz than before. As a rule, run 455 kHz when you need depth and range, and 800 or 1,000 kHz when you want detail. High-contrast color palettes help pick fish out of cover.
For fish arches you need a second transducer. Garmin pairs the GT36UHD-TM with a GT8HW-IH or GT15M-IH in-hull through a Y-cable (each sold separately) to add CHIRP traditional sonar. We sell that pairing as the GT36UHD-TM and GT8HW-IH bundle, or you can go to the GT56UHD-TM, which has high-wide CHIRP built in.
Garmin GT36UHD-TM transducer specs
| Item | Spec |
|---|---|
| Part number | 010-13072-00 |
| Frequencies | 455 kHz (425-485), 800 kHz (790-850), 1,000 kHz (940-1,100) |
| Power | 500 W, ClearVü and SideVü |
| Beamwidth (ClearVü and SideVü) | 0.52 x 52 degrees at 1,000 kHz; 0.64 x 35 at 800 kHz; 1.1 x 52 at 455 kHz |
| Maximum depth | ClearVü 400 ft, SideVü 500 ft |
| Sensors | Depth and water temperature |
| Connector and cable | 12-pin, 25 ft |
| Mounting hardware | Transom and trolling motor, both included |
Mounting it
On the transom, put it where water flows clean at speed, clear of strakes, rivets and prop wash. Our spec sheet doesn’t list supported transom angles for this model, so email us yours if it’s unusual. On a trolling motor, run the cable along the shaft, leave a loop at the steering pivot so it doesn’t bind, and keep it well clear of the prop.
Questions
Will the Garmin GT36UHD-TM transducer show fish arches?
No. It’s ClearVü and SideVü only. Add an in-hull through a Y-cable, or choose the GT56UHD-TM for CHIRP and scanning sonar in one housing.
Will it plug into my Garmin?
It has a 12-pin connector, so your unit needs a 12-pin port with UHD scanning support. Tell us your model and we’ll check before you buy. Garmin’s GT36UHD-TM listing confirms the part number.
Can I return it?
Transducers are final sale per our returns policy, so confirm the fit first.
More options are in our Garmin transducers section. Email sales@trollingmotorsdirect.org with your boat, transom and display model and we’ll make sure the Garmin GT36UHD-TM transducer is the right pick.









