Description
This Live View transducer mount for trolling motor shafts puts a Garmin LiveScope, Panoptix or P22, a Humminbird MEGA Live or a Lowrance ActiveTarget transducer on a remote control trolling motor. CNC machined clamps and an aluminum tube hold the transducer on the motor, and a coiled protective hose keeps the cable in check. It now fits the new Minn Kota Quest series too.
Transducers and motors it fits
On the transducer side, it takes Garmin Panoptix, LiveScope and P22, Humminbird MEGA Live, and Lowrance ActiveTarget. Because the Live View mount rides on the motor, the transducer looks wherever the motor is pointed. Our live sonar guide has more on how these setups work on the water.
These motors are on the options list:
- Minn Kota Terrova: 2016 and older without lift assist, 2017 to 2023 with lift assist, 2024 and newer without lift assist, and Terrova Quest
- Minn Kota Riptide Terrova: 2017 to 2023 with lift assist, 2024 and newer without lift assist, and Riptide Terrova Quest
- Minn Kota Ultrex, Ultrex Quest, Ulterra and Ulterra Quest
- Minn Kota Riptide Instinct Quest, Riptide PowerDrive and V2 PowerDrive
- MotorGuide Xi3 and Xi5, freshwater or saltwater, plus Garmin Force, Lowrance Recon and Power-Pole Move PV
The Xi3 and Xi5 use the same 1-1/4 inch composite shaft, so one option covers both. Its shaft lengths are 45, 54, 60 and 72 inches. If your Xi has a 36 or 48 inch shaft, email us before you order and we’ll confirm the kit.
Choosing your options
Ordering the Live View transducer mount for trolling motor setups takes two picks: your motor first, then the shaft length. The lengths on the list run 36, 45, 48, 50, 52, 54, 57, 60, 72, 84, 87, 96 and 100 inches, but not every length is offered for every motor, so the drop-down narrows down once your motor is chosen. If you don’t know your shaft length, check the model description on your receipt or registration, or email us a photo of the motor.
Terrova owners: check for lift assist
Terrova motors with lift assist (2017 to 2023) have a plastic paddle mounted to the shaft, and the groove in the shaft has a belt in it. You’ll also see a big plastic collar on the shaft right above the motor that looks like a donut. If yours has those, choose the lift assist option. Minn Kota’s Terrova page shows the current models if you’re comparing.
What comes in the Live View transducer mount for trolling motor kit
- CNC machined clamps in a tumbled aluminum finish
- Aluminum tube
- Black protective coiled hose, heavy duty and made exclusively for these mounts
- All stainless steel hardware
The hose is split from one end to the other, so the transducer cable presses in without cutting off connectors. The clamps are not painted black. Some photos show black clamps because they’re from customer boats where the owner painted them.
Getting the install right
When you install the Live View transducer mount for trolling motor shafts, position the clamps so the motor still stows and deploys cleanly. They don’t have to sit in line with the motor; even with the clamps turned, you can still align the transducer with your trolling motor’s arrow. Not every motor can be set up exactly like the main photo, and that’s normal.
MEGA Live has molded cable holders that make the hose pucker. Wrap black electrical tape around the hose at those spots and it lies flat. More parts and steering add-ons are in our Live View mounts section.
Questions
Does the transducer turn with the motor?
Yes. The Live View mount is clamped to the motor, so the transducer points where the motor points. If you’d rather aim it separately, look at the Cable Steer.
Can I get this Live View transducer mount for trolling motor use bundled with LiveScope?
Yes. The LiveScope Plus bundle pairs the system with this Live View mount.
If your motor isn’t on the list or you can’t tell which Terrova you own, email sales@trollingmotorsdirect.org with your motor, shaft length and transducer, and we’ll match the right option.



















