Description
For one transducer on the transom that does fish arches and scanning, the Garmin GT56UHD-TM transducer is the one we’d look at first. It combines high-wide CHIRP traditional sonar with Ultra High-Definition ClearVü and SideVü, all through a single 12-pin plug and a 25 ft cable. Garmin part number 010-13073-00 comes with hardware for both transom and trolling motor mounting.
Three kinds of sonar in one housing
High-wide CHIRP sweeps 150 to 240 kHz at 350 W for clear target separation and fish arches down to 800 ft in freshwater. ClearVü looks straight down through a downward-facing element that puts more power on targets, reaching 400 ft. SideVü covers both sides out to 500 ft and gets 20% more range at 1,000 kHz than before.
The scanning side runs at 455, 800 and 1,000 kHz at 500 W, so you can trade range for detail as the water gets deeper. Garmin’s manual page on sonar frequencies explains that trade in plain terms.
Garmin GT56UHD-TM transducer spec table
| Item | Spec |
|---|---|
| Part number | 010-13073-00 |
| Traditional sonar | High-wide CHIRP 150-240 kHz, 350 W, beamwidth 24-16 degrees |
| ClearVü and SideVü | 455 kHz (425-485), 800 kHz (790-850), 1,000 kHz (940-1,100), 500 W |
| Scanning beamwidth | 0.52 x 52 at 1,000 kHz; 0.64 x 35 at 800 kHz; 1.1 x 52 at 455 kHz |
| Maximum depth | Traditional 800 ft freshwater; ClearVü 400 ft; SideVü 500 ft |
| Sensors | Depth and temperature |
| Transom angle | 0° to 70° |
| Connector and cable | 12-pin, 25 ft |
Transom or trolling motor
On the transom, mount it where water stays smooth and unbroken at speed, clear of strakes and the prop. On a trolling motor, the scan follows wherever the bow points, which is handy when you’re working one brush pile or dock. Either way, secure the cable so it can’t reach the prop, and leave slack at any pivot.
Force Kraken owners should look at our GT56UHD-TR listing, which is sold for that motor. If you want scanning only, the GT36UHD-TM drops the CHIRP side.
Before you order
Check three things before buying the Garmin GT56UHD-TM transducer. Your display needs a 12-pin port that supports CHIRP and UHD scanning, and your transom angle should fall inside 0° to 70°. And the 25 ft cable has to reach the helm from where you’ll mount it, with some slack left over. If any of those is a question mark, email us first.
Questions
How is the Garmin GT56UHD-TM transducer different from the GT36UHD-TM?
The GT56 adds high-wide CHIRP traditional sonar. The GT36 is scanning only and needs a second transducer for fish arches.
Does it read water temperature?
Yes, it gives depth and temperature. There’s no speed sensor.
Will it work with my display?
It needs a Garmin with a 12-pin transducer port that supports CHIRP and UHD scanning. Send us the model, because transducers are final sale under our returns policy.
See all our Garmin transducers, or email sales@trollingmotorsdirect.org with your boat, transom angle and graph model and we’ll confirm the fit.









