Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin GT56UHD-TR Transducer

$474.99

Garmin’s GT56UHD-TR trolling motor transducer for the Garmin Kraken, ordered by your motor’s shaft length (48, 63 or 75 inch). Traditional CHIRP, ClearVü and SideVü; 12-pin. Includes the transducer replacement kit.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Garmin GT56UHD-TR transducer puts traditional CHIRP, ClearVü and SideVü sonar in the nose of a Garmin Kraken trolling motor. We list it by shaft length, 48, 63 or 75 inch, so the kit matches the motor it’s going into. It comes with Garmin’s transducer replacement kit, mounting hardware and documentation.

Pick your shaft length

Choose the option that matches your Kraken’s shaft: 48, 63 or 75 inch. The cable runs up through the shaft, so the shaft length decides which version you need. If your Kraken has a 90 inch shaft, email us; it isn’t one of the options here.

Garmin’s Kraken installation manual notes that only select models come with a built-in 12-pin transducer, and models without one need a transducer fitted before you connect the motor to a compatible chartplotter. The GT56UHD-TR is the part for that job, or for replacing a damaged one.

With the Garmin GT56UHD-TR transducer in the nose, your down and side imaging looks wherever the bow points. That’s handy when you’re working a shoreline or a channel edge at trolling speed and want the picture under the front of the boat, not the back.

Garmin GT56UHD-TR transducer specs

SpecGarmin figure
Traditional sonarHigh-wide CHIRP, 150 to 240 kHz, 350 W
ClearVü and SideVü455 kHz (425 to 485), 800 kHz (790 to 850), 1000 kHz (940 to 1100), 500 W
Beamwidth, CHIRP24 to 16 degrees
Beamwidth, ClearVü and SideVü0.52 x 52 at 1000 kHz, 0.64 x 35 at 800 kHz, 1.1 x 52 at 455 kHz
Maximum depthCHIRP 800 ft freshwater, ClearVü 400 ft, SideVü 500 ft
SensorsDepth and temperature
Connector12-pin

In the box

  • GT56UHD-TR transducer
  • Transducer replacement kit
  • Mounting hardware
  • Documentation

Take your time pulling the cable through the shaft. Feed it gently, don’t force it past a tight spot, and check the cable jacket for scuffs once it’s through. A dock test before the first trip tells you right away if anything got pinched.

Questions before you order

Which graphs will run the Garmin GT56UHD-TR transducer?

It’s a 12-pin Garmin transducer, so it needs a compatible Garmin chartplotter with a 12-pin transducer port. Check your unit’s sonar support before ordering, or browse our Garmin graphs and the Garmin fish finder guide.

Will it fit a Force or Force Pro?

This listing is for the Kraken. The Force Pro already ships with its own GT56UHD transducer. Email us if you’re working on a Force.

What’s the return policy on transducers?

Transducers count as electronics, which are final sale here. The full terms are in our returns policy.

Send your Kraken shaft length and graph model to sales@trollingmotorsdirect.org and we’ll confirm the right version. The motor itself is the Garmin Force Kraken, and more parts are in our Garmin trolling motor accessories.

Additional information

Trolling Motor Shaft Length

48", 63", 75"

Related products

error: Content is protected !!