Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance Active Imaging 3in1 Nosecone for RECON

$359.00

Lowrance Active Imaging 3-in-1 nosecone (000-16353-001) for the Recon trolling motor. It replaces the HDI nosecone and gives CHIRP, DownScan Imaging and SideScan from the bow. Ghost nosecones don’t fit the Recon.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Recon owners who want SideScan at the bow add the Lowrance Recon Active Imaging nosecone (000-16353-001), Lowrance’s 3-in-1 sonar upgrade for the Recon trolling motor. It replaces the HDI nosecone on the front of the lower unit and gives you CHIRP, DownScan Imaging and SideScan from the bow. There’s no transducer to clamp to the shaft and no cable zip-tied down the outside.

What changes over the stock nosecone

Lowrance’s Recon spec sheet lists an HDI nosecone as included on the freshwater Recon, with medium and high CHIRP, and names Active Imaging 3-in-1 as the user-upgradable option. The upgrade adds SideScan, the view for scanning a bank, a flat or a row of docks before you commit to fishing it.

  • CHIRP sonar: fish and bottom, like the HDI nosecone
  • DownScan Imaging: a picture of cover and structure under the bow
  • SideScan: the added view, out to each side of the boat
  • Connection: a mini 9-pin to 9-pin Lowrance adaptor, which Lowrance lists with the freshwater Recon

Lowrance Recon Active Imaging nosecone fit

It’s made for the Recon. Lowrance lists the Ghost nosecone as not compatible with the Recon, and the Ghost has its own Active Imaging 3-in-1 for Ghost, so buy the one named for your motor.

The spec sheet shows the HDI nosecone and the adaptor with the freshwater Recon. If you run a saltwater Recon, email us before ordering so we can check what you need to get sonar to your display. The adaptor is also sold on its own as our Lowrance sonar adapter cable.

Display side

To see SideScan you need a Lowrance display that reads Active Imaging, such as an Elite FS or HDS PRO. Our Lowrance graphs are listed with or without a transducer, and at the bow the nosecone does the transducer’s job. The Recon also joins your NMEA 2000 network for motor control, but the sonar runs on its own cable to the display’s sonar port.

For live sonar on top of this, Lowrance says both ActiveTarget and ActiveTarget 2 work with the Recon. That’s a separate transducer on a shaft mount, so it doesn’t replace the nosecone. Most bow setups that run both use the nosecone for the picture under and beside the boat and the live transducer for what’s ahead.

Recon nosecone questions

Is the Lowrance Recon Active Imaging nosecone hard to fit?

Lowrance calls the Recon nosecone plug and play and user-upgradable. Disconnect the motor from the battery first and keep the HDI nosecone as a spare.

Will it fit a Ghost?

Buy the version named for your motor. The Ghost has its own 3-in-1 nosecone.

Do I need a new display for SideScan?

Only if yours can’t read Active Imaging. Send us the model if you’re unsure, since electronics are final sale under our returns policy. Our Lowrance Recon guide covers the rest of the motor.

Email sales@trollingmotorsdirect.org with your Recon’s version, shaft length and display, and we’ll confirm the Lowrance Recon Active Imaging nosecone suits your setup.

Related products

error: Content is protected !!