Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance 2-Blade Weedless Prop for RECON

$64.00

Lowrance 2-blade weedless prop (000-16178-001) for the Recon trolling motor. Keep one as a spare or replace a chipped prop. Lowrance lists the Ghost prop as not compatible with the Recon.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

For a chipped, bent or lost prop on a Recon, the Lowrance Recon weedless prop (000-16178-001) is the 2-blade replacement made for that motor. Lowrance lists a weedless prop as part of the Recon package, pitched at getting into the hardest-to-reach spots. It’s also a sensible spare to keep in the boat.

Fit: made for the Recon

This prop is for the Recon. Lowrance lists the Ghost prop as not compatible with the Recon, so the two can’t be swapped. If you also run a Ghost, its prop is the Lowrance Ghost prop kit.

Lowrance sells the Recon in freshwater and saltwater versions. If you’re not sure what’s on your motor now, email us a photo of the lower unit and we’ll confirm the part.

Why a 2-blade weedless prop

A weedless prop is shaped to shed grass and pads instead of wrapping them around the hub. On a motor that spends the day holding a spot on a weed edge or creeping through cover, that means fewer stops to clear the prop.

Fishing line is the other thing that collects behind any prop. Pull the Lowrance Recon weedless prop now and then and check for line wound around the shaft, since it can work its way toward the seals.

Swapping it

  • Disconnect the motor from the battery before you touch the prop.
  • Note the order of the nut and washers as they come off.
  • Check the drive pin. Replace it if it’s bent or sheared.
  • Torque the nut to the figure in your Recon manual, by hand, not with an impact.

Salt water and the anode

Lowrance says a freshwater Recon needs the anode prop kit before it goes into salt or brackish water. Our Lowrance prop shaft anode installs over the prop nut on the back of the prop, so it’s easiest to fit while the prop’s already off. After salt trips, a freshwater rinse of the lower unit helps everything last.

Lowrance’s Recon page has the motor’s full feature list, and our Lowrance Recon guide covers the parts we stock for it. Every Recon spare we carry is in Lowrance trolling motor accessories.

Questions we get

Will the Lowrance Recon weedless prop fit a Ghost?

No. The Ghost and the Recon each have their own prop.

Do I need the anode as well?

Only if a freshwater Recon is heading into salt or brackish water. Lowrance says it needs the anode prop kit first.

Is it worth carrying a spare?

If you fish around rock, stumps or oyster bars, yes. A prop, its nut and a socket take up little room. It’s final sale like our other electronics (returns policy), so check your model with us before ordering.

Email sales@trollingmotorsdirect.org with your Recon’s shaft length and version, and we’ll confirm the Lowrance Recon weedless prop and anything else you need.

Related products

error: Content is protected !!