Description
If the adapter that came with your Ghost or Recon is lost or broken, the Lowrance mini 9-pin adapter cable (000-15327-001) gets the nosecone sonar back on your screen. It connects the mini 9-pin sonar plug on a Lowrance trolling motor to the standard 9-pin sonar port on a Lowrance display. Lowrance packs this type of adapter with the Ghost and the freshwater Recon.
Where it goes
On the Ghost, the sonar signal from the nosecone comes out at the foot pedal on a mini 9-pin plug. This cable takes that plug on one end and gives you a standard Lowrance 9-pin on the other, which goes into the sonar port on the display.
The Recon works the same way. Lowrance’s spec sheet lists a mini 9-pin to 9-pin Lowrance adaptor with the freshwater Recon and its HDI nosecone.
Lowrance mini 9-pin adapter cable details
| Item | Detail |
|---|---|
| Part number | 000-15327-001 |
| Ends | 9-pin mini to standard 9-pin |
| Comes in the box with | The Lowrance Ghost, per Lowrance’s box list, and the freshwater Recon |
| Job | Getting nosecone sonar to a Lowrance display |
Lowrance’s Ghost 47 page lists the Sonar Adapter Cable, 9P Mini to 9P in the box with the HDI nosecone, TMC-1 compass and network T-connector. It works the same whether you run the HDI nosecone or a 3-in-1 such as the Recon Active Imaging nosecone.
Check before you order
- Your display’s sonar port: this cable ends in a 9-pin. If your display has a 7-pin port, email us first so we can check the whole cable run.
- Saltwater Recon: email us before ordering a nosecone or this cable for one, so we can confirm the full setup.
- Connections: push each plug fully home. A half-seated sonar plug is a common cause of a blank screen.
Route the cable away from the trolling motor’s power leads where you can, leave a little slack at each end so a plug isn’t hanging by its pins, and keep the joint out of standing water in the bow. If the original adapter broke at a plug, look at how it was routed before you fit the new one.
Our Lowrance fish finder guide covers which displays pair with the Ghost and Recon, and other cables are in Lowrance trolling motor accessories.
Cable questions
Does the Lowrance mini 9-pin adapter cable come with the Ghost?
Yes. Lowrance lists a 9-pin mini to 9-pin sonar adapter in the Ghost box. This is the replacement.
Will it work with a Garmin or Humminbird unit?
No. Both ends are Lowrance connectors, made for a Lowrance trolling motor and a Lowrance display.
What if it won’t reach my display?
Email us the run length. We carry a Lowrance 9-pin extension cable and can check the whole run before you buy, which matters because cables are final sale under our returns policy.
Email sales@trollingmotorsdirect.org with your motor and display model, and we’ll confirm the Lowrance mini 9-pin adapter cable is the piece you’re missing.









