Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin High-efficiency Prop

$99.99

Garmin’s standard replacement propeller for Force trolling motors (010-12832-00), the prop Garmin uses for its thrust ratings. Reuse your nut and washers and torque the nut to 12 lbf-ft.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

When a Force prop is chipped, bent or gone, the Garmin high-efficiency prop, model 010-12832-00, is the standard replacement. It’s the prop Garmin uses for its published thrust figures, so it’s the one to fit if you want the motor running the way Garmin rates it. New Garmin part.

High-efficiency or weedless

The Force Pro ships with two props in the box, a high-efficiency prop and a weedless one. Garmin rates the Force Pro at 100 lb of thrust on 36 V and 80 lb on 24 V, measured to ISO 13342 with the high-efficiency prop.

Run this prop in open water, around rock and timber, and anywhere vegetation isn’t wrapping the blades. If you spend the day in grass and pads, the Garmin weedless prop is built to shed it. Some anglers keep one of each in the boat and change with the season.

Changing the Garmin high-efficiency prop

  1. Disconnect the motor from power. A prop can spin if someone bumps the pedal.
  2. Take off the prop nut with a 9/16 in socket. Keep the nut, lock washer and flat washer.
  3. Pull the old prop and check the drive pin in the shaft. Replace the pin if it’s bent or worn.
  4. Slide the new prop on with its channel lined up over the pin.
  5. Refit the anode, flat washer, lock washer and prop nut, then torque the nut to 12 lbf-ft (16.27 N-m).

Those steps follow Garmin’s Force Pro installation manual. A torque wrench is worth using here; an over-tightened prop nut can crack the hub, and a loose one lets the prop walk on the pin.

Checking the old prop

Look at the blade tips and the hub before you throw the old one in the truck as a spare. Chips and rolled edges cost efficiency and can add vibration you’ll feel through the pedal. A cracked hub means it’s done, spare or not. Keeping a spare Garmin high-efficiency prop and a 9/16 in socket in the boat turns a broken blade into a short stop instead of the end of the day.

Garmin’s service manual lists a prop hardware kit with the nut, washers, pin and sacrificial anode. If yours are corroded, email us and we’ll see what we can get.

Prop questions

Does the Garmin high-efficiency prop fit a Kraken?

Garmin lists it as the standard prop for Force motors. Kraken owners should email us with the model first.

Is the prop nut included?

Plan on reusing your existing nut and washers, as Garmin’s manual describes.

Email sales@trollingmotorsdirect.org with your Force model and how you fish, and we’ll help you choose between props. More wear parts are covered in our trolling motor parts guide and in the Garmin accessories category.

Related products

error: Content is protected !!