Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin Weedless prop

$99.99

Garmin’s weedless prop (010-12832-01) for Force trolling motors, made to push weeds away in heavy vegetation. Garmin rates its high-efficiency prop as quieter with more thrust, so this one is for grass and pads.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Thick grass, pads and milfoil are where the Garmin Force weedless prop (010-12832-01) earns its place. Garmin designed it to push weeds away rather than let them wrap around the prop and the shaft. We list it for Garmin Force motors.

Weedless or high-efficiency

Garmin packs both props with the Force Pro, and its Force Pro installation instructions sum up the trade-off. The high-efficiency prop is quieter and provides more thrust. The weedless prop is designed to help keep weeds from wrapping around the prop and the shaft.

WeedlessHigh-efficiency
Part number010-12832-01010-12832-00
Garmin’s descriptionHelps stop weeds wrapping the prop and shaftQuieter, more thrust
Where it fits bestGrass, pads, heavy coverOpen water

Garmin’s thrust tables are measured with its high-efficiency prop, so don’t expect the same numbers from the weedless one. In heavy cover, the Garmin Force weedless prop means fewer stops to cut weeds off the hub. If your water changes through the year, keeping one of each lets you swap as the weeds come and go. The Garmin high-efficiency prop is the other half of that pair.

Swapping a Garmin Force weedless prop

These steps come from Garmin’s Force manuals. Disconnect the motor from the battery first.

  1. Loosen the prop nut with a 9/16 in (15 mm) socket.
  2. Pull the prop and set aside the nut, lock washer and flat washer.
  3. Check the anode behind the prop and the drive pin in the shaft. Replace the pin if it’s missing or damaged.
  4. Slide the new prop on, then fit the anode, flat washer, lock washer and nut in that order.
  5. Tighten the nut to 16.27 N-m (12 lbf-ft).

Garmin says to replace the anode once it’s smaller than half its original size. Keep the prop you take off in the boat as a spare, with a 9/16 socket in the dry box.

Fit check

Garmin ships a weedless prop with the Force Pro, and our listing names this one for Force motors. If you run a Force Kraken, email us before ordering so we can confirm the prop for your model. Other spares are in our Garmin trolling motor accessories, and our trolling motor parts guide covers props, anodes and nose cones.

Prop questions

Will a weedless prop slow my boat down?

Garmin rates the high-efficiency prop as quieter with more thrust, so expect a little less push from the weedless one. In heavy weeds that trade is usually worth it.

Do I need new hardware to fit it?

Reuse your nut, washers and anode if they’re in good shape. Garmin’s field service manual lists a propeller hardware kit (S00-01000-28) if you’ve lost them.

Should I carry both props?

If you fish open water and weeds in the same season, it’s handy. A swap needs only a 9/16 socket and a torque wrench. Garmin parts are final sale under our returns policy, so check fit with us before you order.

Email sales@trollingmotorsdirect.org with your Garmin motor model and we’ll confirm the Garmin Force weedless prop fits before you order.

Related products

error: Content is protected !!