Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

MEGA 360 Garmin Trolling Motor Bracket Only

$172.00

The Low Pro 360 mounting bracket for a Humminbird MEGA 360 on a Garmin Force trolling motor, with bolts and washers. Black powder coated. Bracket only; the dog bone clamp is sold separately.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This is the Garmin Force Low Pro 360 bracket on its own, the mounting bracket that holds a Humminbird MEGA 360 on a Garmin Force trolling motor. It comes with bolts and washers and a black powder coated finish.

Bracket only: who it’s for

The bracket is half of a two-piece install. Our MEGA 360 Garmin Force mounting hardware kit pairs it with a 360 dog bone and stainless hardware. Buy the bracket alone when you already have a good clamp, when a bracket got bent and needs replacing, or when you’re moving a 360 setup to a second Force-equipped boat and only need the motor side.

If you’re starting with nothing, the kit is the simpler order.

What you get

ItemDetail
PartLow Pro 360 mounting bracket for the Garmin Force
IncludedBolts and washers
FinishBlack powder coat
Not includedDog bone clamp, MEGA 360

Keep the washers under the bolt heads when you install it. They spread the clamping load so the bolt heads don’t dig into the powder coat, and they make the bracket easier to adjust later.

Mounting the Garmin Force Low Pro 360 bracket

The full Force kit is listed as mounting on either the port or starboard side, so pick the side that gives the 360 cable the shortest, cleanest run to your graph and keeps the deck clear when the motor is stowed. Fit the bracket, add your clamp, and snug the bolts. Cycle the motor through stow, deploy and full steering a few times before final tightening.

Powder coat chips if a wrench slips, so use the right size tool and touch up any bare aluminum before it sees salt water. If you need the clamp, the LP360 dog bone clamp is sold separately; email us and we’ll confirm it’s the right one for this bracket.

Before you order

This Garmin Force Low Pro 360 bracket is for the Garmin Force. The Force Kraken uses a different 360 mount, and Force Pro owners should check with us first. Minn Kota’s 360 Imaging page, where Humminbird’s MEGA 360 is now sold, covers the transducer side if you’re still deciding on the 360 itself, and remember the 360 needs a compatible Humminbird graph to display on.

Our returns policy allows returns of unused non-electronic parts within 30 days. Browse the rest of our MEGA 360 mounts for other motors.

Questions

Does the Garmin Force Low Pro 360 bracket include the dog bone clamp?

No. It’s the bracket with bolts and washers only. The full kit includes the clamp.

Is it black?

Yes, it’s black powder coated.

Email sales@trollingmotorsdirect.org with your Garmin Force model and what you already have on the boat, and we’ll tell you whether the bracket or the full kit makes more sense.

Related products

error: Content is protected !!