Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

MEGA 360 Garmin Force Mounting Hardware

$297.00

Everything needed to mount a Humminbird MEGA 360 to a Garmin Force trolling motor: Low Pro 360 bracket, 360 dog bone clamp, bolts and stainless hardware. Mounts on the port or starboard side.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Everything you need to hang a Humminbird MEGA 360 on a Garmin Force comes in the MEGA 360 Garmin Force mounting hardware kit. It has the bracket, bolts and clamps for the job: our Low Pro 360 mount, the 360 dog bone clamp and stainless steel hardware, and it mounts on either the port or starboard side of the motor.

Kit contents

  • Low Pro 360 mount (bracket)
  • 360 dog bone clamp
  • Bolts and stainless steel hardware

That’s the full set of mounting parts for a 360 on a Force. If you already own the dog bone, the Garmin Force bracket only saves you buying it twice, and if you already own the bracket, the dog bone clamp is sold separately too.

Port or starboard on the Force

The MEGA 360 Garmin Force mounting hardware works on either side, so let the rest of the boat decide. Pick the side with the cleaner cable route to your Humminbird graph and the most room on the deck when the motor is stowed.

If you plan to add a Live Sweep too, our Live Sweep Garmin Force hardware also goes on either side. Email us before you bolt anything and we’ll help you lay out both on one motor.

Installing the MEGA 360 Garmin Force mounting hardware

Have Garmin’s Force owner’s manual handy so you know how the motor stows and deploys before you add weight to it. Fit the bracket first, then the dog bone, and snug all the stainless bolts. Run the motor through several stow and deploy cycles and full steering both ways, watching the 360 and its cable, before final tightening.

Leave the 360 cable a little slack where the motor pivots and secure it to fixed parts with ties, never to anything that swings. The product gallery also has a photo of the bracket against a ruler, which helps if you’re checking clearances on a crowded bow.

Kraken and Force Pro owners

This kit is listed for the Garmin Force. The Force Kraken has its own MEGA 360 Kraken mount. If you run a Force Pro, email us before ordering so we can confirm the fit. Our Garmin trolling motor guide is a good read if you’re still weighing motors.

Questions

Is this everything I need?

For the mounting side, yes: bracket, dog bone clamp, bolts and stainless hardware. The MEGA 360 itself is sold separately, and more parts are in our MEGA 360 section.

Can I return the MEGA 360 Garmin Force mounting hardware?

Yes, within 30 days if it’s unused; our returns policy covers the details. The kit also counts toward free ground shipping on orders of $199 or more to the lower 48 and DC, per our shipping policy.

Email sales@trollingmotorsdirect.org with your Force model, shaft length and graph, and we’ll double-check the fit before you order.

Related products

error: Content is protected !!