Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Bridge – FWN

Price range: $190.00 through $213.00

A bolted, powder coated aluminum bridge that holds up to three fish finders, as seen on Fishing with Nordbye. Choose 5″, 6″, 7″ or 8″ legs. Gimbals, graphs and deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The FWN bridge mount puts up to three fish finders on one bridge, for anglers who want more than one screen up front. FWN is short for Fishing with Nordbye, and this is the bridge seen on Andrew Nordbye’s show. It’s machined aluminum, bolted together, powder coated and fitted with stainless steel hardware.

How the screens go on

The bridge holds up to three units. Its layout includes a gimbal plate mount on one side of the bridge, plus an additional mount that attaches to the opposite side of the gimbal. The photos show how those pieces sit together.

Three screens on the bow usually means something like forward-facing sonar on one, side or down imaging on another and a map on the third. You don’t have to fill every spot on day one; run two and add the third later.

In the box, and what to buy separately

IncludedNot included
Machined aluminum bridge, bolted togetherGimbals
Durable powder coat finishGraphs or monitors
Stainless steel hardwareDeck mounting hardware

Assembly uses standard Allen wrenches, so the same set you carry in the boat box will tighten everything up again mid-season. The FWN bridge mount is made in the USA.

Choosing a leg height

Legs come in 5″, 6″, 7″ and 8″. The photos with rulers show the 5″ legs, so add the difference if you pick something taller. A 7″ leg, for example, puts everything 2″ higher than what you see in those pictures.

Taller legs give more room underneath for a foot pedal and lift the screens closer to eye level when you fish standing. They also leave space to tuck a pedal cord or a transducer cable under the bridge without pinching it. Shorter legs keep the whole array lower and out of the wind. Measure your pedal and think about where your eyes are before choosing a leg height.

Installing on the deck

Bring your own deck hardware sized for your deck. On aluminum decks, the Bridge Under Plate goes beneath the deck to cut down on flex, and it fits every bridge we carry except the Bass Cat bridge. Three screens put a fair bit of weight up top, so a solid base pays off. Check that the bridge sits square to the boat’s centerline before you mark the holes, so all three screens face straight back at you.

Questions

Does the FWN bridge mount include gimbals?

No. Gimbals and graphs are separate. Use the brackets that came with your units or ask us what fits.

Can I run it with two screens?

Yes. Up to three is the limit, not the requirement.

You’ll find our other bridges under bridge mounts. Email sales@trollingmotorsdirect.org with your boat, pedal and screens, and we’ll help you choose a leg height for the FWN bridge mount.

Additional information

Bridge Leg Height

5", 6", 7", 8"

Related products

error: Content is protected !!