Description
Live sonar transducers hang off the front of the boat where stumps, rocks and docks find them first. The EZ Drift transducer clip is built for that: instead of a rigid mount that bends or snaps the transducer, it lets the transducer move and pop off when it meets an obstacle. It also makes small adjustments on the fly easy.
What the EZ Drift transducer clip fits
There are two things to match: your transducer and your trolling motor.
| Fits | Doesn’t fit |
|---|---|
| Garmin LVS32 (LVS 32 version) | Garmin LVS34 |
| Lowrance Active Target (Active Target version) | Minn Kota Ultrex Quest |
| Minn Kota Ultrex | |
| Garmin Force |
Choose the LVS 32 or Lowrance Active Target version at checkout. The Ultrex fit is for the standard Ultrex, not the Quest. Garmin’s Force owner’s manual is handy if you want to see the Force’s own transducer setup.
Why a breakaway clip
A transducer bolted solid to the motor takes the full hit when you drive the bow into cover. Something has to give, and too often it’s the transducer, its bracket or its cable. The clip gives first. The transducer moves, pops off, and you clip it back on rather than paying for a new one.
The same clip makes quick angle tweaks simple when you’re fishing, without digging out tools. If the fish are holding a little deeper or shallower than your view, you can correct the aim in a few seconds and get back to casting.
It won’t make a transducer bulletproof. A hard enough hit can still do damage, so drive carefully around cover. But it gives the transducer a way out that a rigid mount doesn’t.
In the box and fitting it
The EZ Drift transducer clip comes with the hardware needed to attach it to your transducer. Fit it with the motor stowed, check the transducer is square to the shaft, then deploy and make sure the cable has slack to move if the clip lets go.
After a pop-off, check the cable, the clip and the transducer for damage before you clip it back on. If the clip lets go often in the same spot, that’s a sign to slow down or raise the motor a notch in that water. Pair it with an EZ Drift LVS32 hood or Active Target hood to protect the cable exit as well.
Clip questions
Will it fit my LVS34?
No. The EZ Drift transducer clip will not fit the LVS34.
Does it fit an Ultrex Quest?
No, only the standard Minn Kota Ultrex and the Garmin Force.
Can I return it if it doesn’t fit?
An unused clip can come back within 30 days under our returns policy.
Hoods and other parts are in EZ Drift accessories. Email sales@trollingmotorsdirect.org with your motor and transducer and we’ll confirm which version to order.











