Description
Behind the steering wheel is where your eyes already are when you drive, and the console track plate double mount puts two graphs right there. It’s very adjustable, built from anodized aluminum with stainless steel hardware, and made in the USA. You choose the arm length and the track length to suit your console.
Why behind the wheel
On a lot of boats the dash space behind the wheel is the best real estate for a graph, but it’s cramped. The wheel, the gauges and your hands all compete for the same few inches. This mount is made to work in that space, holding two screens up where you can read them through or above the wheel.
Two graphs at the helm is a common setup on bigger fishing boats: a chart on one, sonar on the other, both in view while you run. The console track plate double mount keeps both on one mount instead of two separate brackets fighting for space.
Options on the console track plate double mount
| Option | Choices |
|---|---|
| Arm length | 8″ or 10″ |
| Track length | 15″ or 18″ |
Arm length and track length are separate choices, so there are four combinations: 8″ arms on a 15″ or 18″ track, or 10″ arms on either track. Measure the flat area behind your wheel before choosing the track. The track has to fit the space you have. For arm length, think about how high the screens need to sit to clear the top of the wheel and gauges while you can still see over them.


Setting it up
Mounting hardware isn’t included, so plan on stainless bolts sized for your console with washers or a backing plate inside. Before you drill, sit at the helm with both graphs held in place. Turn the steering wheel lock to lock and make sure your hands don’t hit a screen. Check that you can still read every gauge.
Run power and transducer cables behind the dash before the graphs go on, and leave slack for tilting. Once it’s bolted down, use the adjustment to fine-tune both screens for your seat.
The anodized finish is part of the aluminum’s surface, so it won’t peel or flake where your hands brush it.
Questions
Does the console track plate double mount hold one graph?
It’s designed as a double. If you only need one screen, our console single mount is a better fit.
What’s the difference from the console track shelf mount?
Both live in our console track range. See the console track shelf mount listing to compare, or email us with your console layout.
See the rest of the console track mounts, or email sales@trollingmotorsdirect.org with photos of your helm and your two graphs for help choosing arm and track length.























