Description
The Live Sweep long dog bone is the clamp that joins a Live Sweep or Cable Steer to an Ultrex mount, the Garmin mount or a Lowrance Ghost. It’s a black powder coated aluminum link with a 1 3/4″ hole at each end, 6″ center to center, and it comes with the stainless bolts to fasten it.

What the Live Sweep long dog bone connects
It’s the link between your steering unit and the mount it hangs from. On the motor side, it’s listed for Minn Kota Ultrex mounts, the Garmin mount and the Lowrance Ghost. Ghost owners can look up their motor on Lowrance’s Ghost trolling motor page.
On the steering side, it suits both units we sell: the Live Sweep, which is the 12 volt sweeping arm, and the Cable Steer, which you turn by hand with a knob at the graph.
Specs
| Material | Aluminum, black powder coat |
|---|---|
| Holes | 1 3/4″ at both ends |
| Center to center | 6″ |
| Compared with the XL | 3″ shorter |
| Hardware | Stainless steel bolts included |
| Tools | Standard allen wrenches |
| Made | Machined and assembled in the USA |
Long or XL
We sell two lengths. This one is 6″ center to center. The XL dog bone is 9″, three inches more, for setups that need the extra spacing.
If you’re replacing a dog bone, measure from the center of one hole to the center of the other on the old part and order the same. For a new install, send us a photo of the motor and mount and we’ll tell you which length to order.
Fitting tips
- Seat the allen wrench fully before you turn it, so you don’t round a bolt head or chew up the powder coat.
- Bring the clamp bolts up evenly, a little at a time, so the clamp closes square.
- On a saltwater boat, a light coat of anti-seize on the stainless threads helps them come apart years from now.
- Check the bolts again after the first couple of trips.
The rest of the range is under Live Sweep mounts and parts.
Dog bone questions
Does the Live Sweep long dog bone fit a MotorGuide Tour?
No. Tour and Tour Pro motors have their own Tour dog bone. This one is listed for Ultrex mounts, the Garmin mount and the Ghost.
Can I use it with a Cable Steer instead of a Live Sweep?
Yes. It mounts a Cable Steer to the same motors and mounts.
What’s in the package?
The clamp and its stainless bolts. Tools aren’t included, but standard allen wrenches do the job.
Send your motor, mount and a photo to sales@trollingmotorsdirect.org and we’ll confirm the Live Sweep long dog bone is the right part before you order.










