Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Live Sweep Dog Bone XL Clamp 1 3/4 (Both Ends)

$150.00

Black powder coated aluminum dog bone clamp, 9 inches center to center, 3 inches longer than our long dog bone. 1 3/4 inch hole at both ends. Mounts a Live Sweep or Cable Steer to Ultrex, Garmin or Ghost.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Three extra inches is the whole point of the Live Sweep XL dog bone. It measures 9″ center to center instead of the 6″ of our long dog bone, with the same 1 3/4″ hole at both ends. It mounts a Live Sweep or Cable Steer to Ultrex mounts, the Garmin mount or a Lowrance Ghost.

When the XL makes sense

The dog bone sets the spacing between your steering unit and the mount it hangs from. When the 6″ link leaves things tighter than you’d like, the Live Sweep XL dog bone gives you that room. The photos on this page include the XL beside the standard one and against a ruler, so you can see the difference for yourself.

If you’re replacing an XL, measure the old one center to center; if it reads 9″, this is your part. For a first install, email us a photo of the motor and mount and we’ll say whether you need 6″ or 9″. The shorter version is the Live Sweep long dog bone.

Live Sweep XL dog bone measurements

  • 9″ center to center
  • 3″ longer than the long dog bone
  • 1 3/4″ hole at both ends
  • Aluminum with black powder coat
  • Stainless steel hardware included
  • Standard allen wrenches required
  • Machined and assembled in the USA

Motors and mounts it works with

It’s listed for Minn Kota Ultrex mounts, the Garmin mount and the Lowrance Ghost. Minn Kota’s trolling motor lineup shows current Ultrex models if you’re checking which one you have. MotorGuide Tour and Tour Pro motors use a separate Tour dog bone.

It suits both of our steering units, the powered Live Sweep and the hand-turned Cable Steer, which is why you’ll find it under Live Sweep parts and Cable Steer parts alike.

Installing it

Work with the motor stowed and the boat on the trailer if you can; it’s easier to keep the parts lined up when nothing is rocking. Start every bolt by hand before you reach for the wrench.

Snug the bolts in turn rather than finishing one side first. A drop of blue medium strength threadlocker keeps them from backing out with vibration and still lets you take them out with hand tools later.

XL questions

Will the Live Sweep XL dog bone replace my long one?

It fits the same mounts, but it spaces things 3″ further apart. Only swap if you want that extra room.

Does it come with bolts?

Yes, stainless steel hardware is included. You supply the allen wrenches.

If you can’t decide between 6″ and 9″ for your Cable Steer or Live Sweep, email sales@trollingmotorsdirect.org with your motor, mount and a photo and we’ll tell you.

Related products

error: Content is protected !!