Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Telescoping Swivel Mount Base Only (Extra)

$180.00

Telescoping swivel mount extra base: the base only, machined aluminum with a black anodize finish. Lets you move your Telescoping Swivel Mount to another spot on the boat or to a second boat.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The telescoping swivel mount extra base is just the base, with no tube or plates, so one Telescoping Swivel Mount can work from two places. Bolt the extra base where you want a second station, lift the tube off one base and set it on the other.

What it’s for

The listing gives two uses, and they cover most of what people buy it for:

  • A second spot on the same boat. One base at the bow, one at the console. Move the graph to wherever you’re fishing.
  • A second boat. One base on each hull, and a single mount and graph that travel between them.

It works because the telescoping tube on our Telescoping Swivel Mount comes off the base. The extra base simply gives the tube another place to land.

One thing to plan for: the graph needs power and a transducer connection at each spot. The base moves the screen, not the wiring, so run a power lead and transducer cable to the second station or plan to carry them across.

Before you drill, set the tube and graph on the new base in the spot you have in mind. Check your sight lines, the swivel clearance and that the cables reach. Five minutes with the mount in hand saves a hole in the wrong place.

What’s in the box

Only the base. It’s machined aluminum with a black anodize finish to match the rest of the mount.

No tube, plates or graph come with the telescoping swivel mount extra base, and the listing doesn’t mention deck hardware, so plan on your own stainless fasteners. Bed each hole in marine sealant when you drill.

Telescoping swivel mount extra base seen from the front

Which mount it suits

The telescoping swivel mount extra base is made for our Telescoping Swivel Mount, such as the telescoping swivel single monitor mount and the double version. If you run the short telescoping swivel, email us to confirm before you order.

Extra base or deck plate

There’s another way to leave a mounting point behind: the telescoping swivel bridge adaptor/deck plate. It’s a 4-inch square, 1/2-inch plate threaded for the swivel base.

The difference is what moves. With deck plates, the base comes off with the mount, which means undoing its bolts. With a telescoping swivel mount extra base at each spot, only the tube moves, and it lifts straight off.

Questions

Does the telescoping swivel mount extra base come with a tube?

No. It’s the base only.

Can I use it on a second boat?

Yes. That’s one of the two uses the listing gives, along with a second spot on the same boat.

Does it fit the short telescoping swivel?

Email us to confirm before ordering.

See all our telescoping swivel mounts, or email sales@trollingmotorsdirect.org with your boat and current mount for fit help.

Related products

error: Content is protected !!