Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Telescoping Swivel Single Monitor Mount

$413.00

Telescoping swivel single monitor mount for one graph. Swivels at the base for glare or position, telescopes for height, and the tube comes off the base. Fits all graphs except Helix 7. Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Our telescoping swivel single monitor mount puts one graph on a tall telescoping tube that turns at the base. It’s the full-height version of our telescoping swivel, set up for a single screen.

Set it high, set it low

The telescoping tube slides up and down, so the screen can sit near eye level while you stand at the bow and drop back down for the ride. The base swivels to deal with sun glare or to point the screen where you need it.

The gallery shows the mount next to a ruler both extended and lowered, which is the quickest way to check it suits your deck and the way you fish.

If the tall version is more height than you need, the telescoping short swivel single mount is the lower one.

Pick it up and go

The telescoping tube comes off the base. Leave the base on the deck and take the tube and graph home, or stash them in a locker so they aren’t on show at the ramp.

To use the same telescoping swivel single monitor mount at the bow and the console, or on a second boat, add a telescoping swivel extra base and move the tube between them.

Graph fit

The mounting plate fits all graphs except the Helix 7, which needs the Helix 7 adapter bracket, sold separately. A Lowrance Elite FS, a Garmin or any other Humminbird with a gimbal bracket goes on as is.

Leave slack in the power and transducer cables for full height and full swivel, and tie them to the tube so they move with it.

Build and install

  • CNC machined aluminum with a black anodize finish
  • All bolts stainless steel Allen head
  • Deck mounting hardware not included

Pick a solid part of the deck. A tall mount with a screen on top acts like a lever, so backing below a thin deck is worth the effort.

Before drilling, stand the telescoping swivel single monitor mount in place at full height with the graph on. Turn it through its full swivel and check the screen clears the windshield and anything overhead.

For a bridge setup over your trolling motor pedal, the single bridge combo includes the mount, a bridge and the adaptor plate.

Questions

Is the telescoping swivel single monitor mount the tall or short version?

The tall one. The short version is sold separately.

Can I take it off the boat?

Yes. The telescoping tube lifts off the base with the graph still on it.

Is deck hardware included?

No. Plan on your own stainless fasteners.

Will it hold a Helix 7?

Yes, with the adapter bracket made for it.

See all our telescoping swivel mounts, or email sales@trollingmotorsdirect.org with your boat and graph model for help choosing.

Related products

error: Content is protected !!