Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Console Mount Single

$200.00

A single graph console mount made for the new SeaArk Flex. It bolts directly to the Flex dash and can be upgraded to a double mount later. Black anodized aluminum. Mounting hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

If you only want one graph at the helm of a new SeaArk Flex for now, the SeaArk Flex single console mount bolts directly to the Flex dash and can be upgraded to a double mount down the road. It’s black anodized aluminum. It may also fit other boats and models.

Built for the Flex dash

Factory dashes rarely have a perfect spot for an aftermarket graph. This mount was made for the Flex, so it bolts straight to the flex dash instead of needing a custom plate or a pod on top. That keeps the install simple.

On another boat it may work too. Measure the area where it would bolt, and check that you can get to the back side of the dash for nuts.

Start with one, add a second later

Plenty of people rig one graph at the console first and add a second later. The SeaArk Flex single console mount is designed with that in mind: it can be upgraded to a double mount down the road, so you aren’t starting over when you buy another unit. Email us when you’re ready and we’ll tell you what’s needed for your setup.

That makes the SeaArk Flex single console mount a sensible starting point if your budget covers one graph now. Place the first screen knowing a second will sit beside it later, and leave room in your cable run for another power lead.

If you already know you want two screens at the helm, our console double mount for the Flex holds both from the start.

What’s included

  • Single console mount for the SeaArk Flex
  • Black anodized aluminum
  • Bolts directly to the Flex dash
  • Upgradeable to a double mount
  • Mounting hardware not included

The black anodized finish is part of the aluminum’s surface rather than a coat of paint, so it won’t flake where your knee or a rod butt rubs it.

Installing on the flex dash

Hold the graph in its gimbal on the mount and sit at the helm. Check that you can see over it, that the wheel and throttle don’t hit it, and that cables can drop straight behind the dash. Mark, drill, and use stainless bolts with washers inside. Leave slack in the power and transducer cables so the gimbal can tilt.

Questions

Does the SeaArk Flex single console mount fit older SeaArk boats?

It was made for the new SeaArk Flex. It may fit other models; send us dash photos and measurements to check.

Are bolts included?

No. Mounting hardware isn’t included.

More parts for the Flex are in our SeaArk section, and other helm options are under console mounts. Email sales@trollingmotorsdirect.org with your boat and graph for help.

Related products

error: Content is protected !!