Description
This 1 inch rail mount rod holder base clamps onto 1″ round rail and gives a screw-in rod holder a solid place to sit. It’s sold as one piece, even though the main photo shows a pair. The holder you see in the pictures is there to show how it looks installed; it doesn’t come in the box.
What’s in the listing
- One rail mount (each), not a pair
- Fits 1″ round rail
- Rod holder thread: 1/2″-13 or 3/8″-16
- Thread hand: LH (left-hand) or RH (right-hand)
- Black anodized aluminum body with stainless steel hardware
- Machined and assembled in the USA
- Rod holder not included
Matching the 1 inch rail mount rod holder to your thread
Both sizes this mount is made for, 1/2″-13 and 3/8″-16, are coarse sizes from the Unified Thread Standard. The first number is the diameter in inches and the second is threads per inch, so a 1/2″-13 stud is fatter and has fewer threads per inch than a 3/8″-16.
Before you order, check the stud or socket on the bottom of your holder. Find out the size, then see which way it turns to tighten. Right-hand thread tightens clockwise, left-hand tightens counterclockwise. A nut or bolt you already know the size of makes a quick test.
There’s no drop-down menu on this listing, so tell us the size and hand you need when you order, or email first if you’re unsure.
Where it goes on the boat
Anywhere there’s 1″ round rail you can reach from where you fish. Clamping to a rail you already have means no new holes in the deck or gunnel, and the mount can move later if a spot doesn’t work out.
Order one per rod. Two rods along one rail means two mounts. Set the holder angle you want before you tighten the clamp all the way, then snug the stainless hardware evenly so the mount sits square on the tube. On a boat that sees salt, a little anti-seize on the threads keeps it easy to adjust next season.
SeaArk owners can find more rail and gunnel accessories in our SeaArk section, and the full range of clamp-on holders is under rail rod holders.
Questions
Does the 1 inch rail mount rod holder come with the rod holder?
No. You get the rail mount only. The holder in the photos is for display, so use one you already own or pick one with a matching thread.
Will it fit 1 1/4″ round rail?
No, it’s sized for 1″ round rail only. For 1 1/4″ pontoon rail we have a pontoon rail clamp, but that one is made for the swivel base, not rod holders.
Can I send it back if it’s the wrong thread?
Unused mounts can be returned within 30 days. The details are on our returns page.
Still not sure about the rail size or thread? Email sales@trollingmotorsdirect.org with your boat and the rod holder you run, and we’ll help you pick the right 1 inch rail mount rod holder setup.














