Description
The Live Sweep Ultrex Quest mount port side bolts a Live Sweep or a Cable Steer to the left side of a Minn Kota Ultrex Quest. It’s the bracket alone, CNC machined from aluminum, powder coated black and fitted with stainless hardware.
Made for the Quest, not the original Ultrex
The Ultrex Quest is a different motor from the original Ultrex, and the brackets are machined for each one separately, so the Live Sweep Ultrex Quest mount port side won’t fit the older motor. If yours is the earlier Ultrex, you want the Ultrex port mount instead. If you’re unsure which you have, check your registration or receipt, look at Minn Kota’s Ultrex page for the current Quest lineup, or send us a photo of the motor.
Live Sweep or Cable Steer
This bracket takes either one. Live Sweep is the 12 volt sweeping arm that turns your live sonar through 320 degrees from pedals or a remote. Cable Steer is the manual route: you aim the transducer with a knob mounted on the gimbal plate of your graph, connected by a 10 foot corrosion resistant cable.
Both are in our shop if you’re still choosing: the Live Sweep section and the manual steering mounts.
Live Sweep Ultrex Quest mount port side specs
- Fits: Minn Kota Ultrex Quest, port side
- Carries: Live Sweep or Cable Steer
- Material: CNC machined aluminum
- Finish: black powder coat
- Hardware: stainless steel
- Dog bone: not included
Before you bolt it on
Think about what else lives on that motor. Our MEGA 360 Ultrex Quest hardware mounts on port, so if you run a 360 on the Quest, your sweep or steer unit belongs on starboard. If port is clear and the cable run to your graph works from that side, the Live Sweep Ultrex Quest mount port side is the right bracket.
Fit it with the motor deployed, snug the bolts, then stow and steer through the full range before final tightening. If you fish salt water, a thin coat of anti-seize on the stainless bolt threads keeps them from seizing in the aluminum. Unused, it can come back within 30 days (our returns policy has the details).
Questions
Is the dog bone included with the Live Sweep Ultrex Quest mount port side?
No. It’s the bracket only. The Ultrex Quest port mounting kit adds the dog bone.
If I start with Cable Steer and switch to Live Sweep later, can the bracket stay?
This bracket is listed for both, so it can stay on the motor. Email us before the switch and we’ll confirm any other parts the change needs.
For a second set of eyes on your setup, email sales@trollingmotorsdirect.org with your Ultrex Quest’s shaft length, your graph and which of the two you plan to run on it.










