Description
With the Live Sweep Ultrex Quest port mounting kit you get both machined pieces for a port side Live Sweep install on a Minn Kota Ultrex Quest: the port mount and the dog bone. They’re CNC machined aluminum with a black powder coat and bolt up with stainless steel hardware.
When the port kit makes sense
Go with the Live Sweep Ultrex Quest port mounting kit when your graph and cable run sit on that side, when you’re moving a Live Sweep over from a boat where it lived on the left, or when starboard already carries something else. The one catch is the MEGA 360: our Ultrex Quest 360 hardware mounts on port, so if a 360 is part of your plan, choose the starboard kit instead.
Install with the motor deployed. Start the bolts by hand, snug the mount and dog bone, then cycle the motor through stow, deploy and full steering in both directions before the final tightening.
Kit contents and build
| Item | Detail |
|---|---|
| Mount | Live Sweep mount for Ultrex Quest, port side |
| Clamp | Dog bone |
| Material | CNC machined aluminum |
| Finish | Black powder coat |
| Hardware | Stainless steel |
| Tools needed | Standard Allen wrenches (not included) |
If you already own a dog bone, the Quest port mount is sold by itself.
Saltwater and long-term care
Aluminum and stainless get along fine as long as you look after them. Put a thin coat of anti-seize on the bolt threads during install so they come apart years from now. Rinse the mount and dog bone with fresh water after salt trips, and touch up any chip in the powder coat before bare aluminum has a chance to corrode.
Once a season, put a wrench on every bolt in the Live Sweep Ultrex Quest port mounting kit and check the transducer cable where it passes the clamps. Catching a loose bolt in the garage beats losing a transducer on the water.
Which Ultrex do you have
This kit is for the Quest only. The original Ultrex uses the Ultrex port kit. Minn Kota’s Ultrex page shows the Quest models, and your registration paperwork will name the exact one. The rest of our Live Sweep parts are in the Live Sweep section.
Questions
Does the Live Sweep Ultrex Quest port mounting kit work with a Cable Steer?
It’s listed as a Live Sweep kit. If you’re rigging a Cable Steer, email us first and we’ll confirm the right parts.
What tools does it take?
Standard Allen wrenches, which you supply. The stainless hardware is in the box.
Can I return it unused?
Yes, unused non-electronic parts can be returned within 30 days. See our returns policy.
Email sales@trollingmotorsdirect.org with your Ultrex Quest shaft length and the graph you run, and we’ll confirm the fit before you order.










