Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

MEGA 360 Ultrex Quest Trolling Motor Mounting Hardware

$360.00

Complete kit to mount a Humminbird MEGA 360 on a Minn Kota Ultrex Quest: low pro 360 bracket, 360 dog bone clamp and stainless steel hardware. Mounts to the port side. Black powder coated, made in the USA.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The MEGA 360 Ultrex Quest trolling motor mounting hardware is the complete package for putting a Humminbird MEGA 360 on a Minn Kota Ultrex Quest. It includes the bracket, bolts and clamp, and it sets the 360 on the port side of the motor. The bracket is black powder coated and made in the USA.

Parts in the package

  • Low pro 360 mount: the bracket that holds the 360 on the Quest
  • 360 dog bone clamp: the clamp that completes the mount
  • Stainless steel hardware: the bolts for the install

The gallery has a second photo of the hardware, which is worth a look so you know what’s what when the box opens. Everything needed to mount the 360 to the Quest is in the package, so you won’t be shopping for extra bolts. Bring your own hand tools and, if you can, a second pair of hands to hold the 360 while you line it up.

Why buy the full MEGA 360 Ultrex Quest trolling motor mounting hardware

We also sell the Ultrex Quest bracket on its own, but it leaves out the dog bone clamp. If you’re rigging a 360 for the first time, the full set saves you tracking down a clamp after the bracket arrives.

Don’t mix parts between the Quest and the original Ultrex without asking us. The Quest bracket is listed for the Quest only, and our Ultrex 360 stabilizer is listed as not fitting the Quest.

Cable routing and upkeep

With the 360 on the left side of the motor, plan your cable run back to the graph so it doesn’t cross where your foot works the pedal or get pinched when the motor stows. A few loose zip ties along the route keep it tidy without binding. Leave a drip loop where the cable drops toward the connector so water runs off instead of following the cable in.

Check the stainless bolts after the first few runs, because trailer miles loosen hardware on any bow. If one keeps working loose, blue threadlocker holds it without making the next removal a fight. More Quest and 360 parts are in our MEGA 360 mounts section.

Questions

Does the MEGA 360 Ultrex Quest trolling motor mounting hardware include the 360?

No. It’s the mount, clamp and hardware. The 360 unit is sold separately, and like all electronics in our shop it’s final sale. The MEGA 360 Imaging – Ultrex page on Minn Kota’s site, which now sells Humminbird’s sonar, covers the unit itself.

Will it fit the original Ultrex?

No. Original Ultrex owners want the MEGA 360 Ultrex mounting hardware kit.

Can it go on the starboard side?

It’s listed for the port side of the motor. Email us if that clashes with something already on your bow. Unused kits can be returned within 30 days; see our returns policy.

Send your Quest’s model and shaft length to sales@trollingmotorsdirect.org and we’ll confirm the MEGA 360 Ultrex Quest trolling motor mounting hardware is right before you order.

Related products

error: Content is protected !!