Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Switchback Arm Double Ducer Mount

$85.00

Adds a second transducer to our Switchback mount so you can run one LiveScope in Forward/Down and another in Perspective. Black anodized aluminum, stainless hardware, made in the USA. Transducers and Switchback not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Switchback arm double ducer mount adds a second transducer to our Switchback, so you can run one LiveScope in Forward/Down and another in Perspective. It’s black anodized aluminum with stainless steel hardware, made in the USA. The transducers and the Switchback itself are not included.

Why run two

Forward/Down shows what’s ahead of and under the boat. Perspective mode gives a top-down view of the water around you, which is useful in shallow water and around cover. The Switchback alone lets you flip between those with its spring loaded adjuster.

With a second transducer on the Switchback arm double ducer mount, you don’t have to flip. Each view stays on screen, and you stop missing fish while you change modes.

What you need for a Switchback arm double ducer mount setup

  • A Switchback Mount, already on your motor or pole
  • Two LiveScope transducers
  • A mount for the second transducer: the factory LiveScope mount, or our Zero Degree Mount (read its fit notes first)
  • Standard Allen wrenches

Your electronics also have to handle a second transducer. Check what your graphs and LiveScope hardware support before you buy one, and think about screen space: two live views side by side want a big display, or two displays.

Installing it

Fit the arm to the Switchback with standard Allen wrenches. Mount the second transducer to the arm with its factory LiveScope bracket or the Zero Degree Mount, then route both cables together down the shaft or pole so they don’t snag when the motor turns or stows.

Set one transducer for Forward/Down and the other for Perspective, then fine tune the angles on the water. Small changes make a big difference in what each view shows. Garmin’s LVS34 installation manual covers the factory bracket and cable care.

Two cables mean twice the chance of a snag. Bundle them loosely with a little slack at the motor head, and check the run after your first few trips. Our Garmin LiveScope guide covers the rest of the setup, and other live sonar mounts are under live view mounts.

Quick answers

Does the Switchback arm double ducer mount include a transducer?

No. The transducers and the Switchback are sold separately. LiveScope transducers are electronics, which are final sale in our shop.

Which transducers does it hold?

It’s made for adding a second LiveScope, mounted with the factory LiveScope bracket or our Zero Degree Mount. For other brands or mixed setups, email us before ordering and we’ll check what you have.

Can I return the arm?

Unused, within 30 days. See our returns policy.

Email sales@trollingmotorsdirect.org with your motor, your Switchback setup and both transducer models, and we’ll check the plan before you buy.

Related products

error: Content is protected !!