Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Zero Degree Mount

$86.00

Zero degree transducer mount for a Live View setup. Choose your trolling motor or pole and your transducer: LVS32, LVS34, LVS42, LVS44 or Lowrance ActiveTarget. Transducer and motor not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The zero degree transducer mount is a heavy duty bracket for running a live sonar transducer in a Live View setup on your trolling motor or a pole. Pick your motor and your transducer from the drop-downs and you get the version made for that pair.

Motors and transducers on offer

The name refers to the angle it holds the transducer at: zero degrees, rather than tilted. The drop-downs list these combinations:

Motor or mountTransducer choices
Ultrex, Ghost, Force, Fortrex, Maxxum, Power Pole ZR, Edge, Pole MountLVS32, LVS34, LVS42, LVS44, Lowrance ActiveTarget
Tour ProLVS34, LVS42, LVS44, Lowrance ActiveTarget
Ultrex QuestLVS34, LVS42, LVS44

One note on the Ultrex Quest. Our fitment note for this mount calls out the Quest with the LVS34 specifically, while the drop-down also offers the LVS42 and LVS44 for that motor. If you run a Quest, email us with your transducer before you order so we can confirm.

What you get

  • Heavy duty zero degree mount
  • Black anodized aluminum
  • Stainless steel hardware
  • Made in the USA

Not included: the transducer and the trolling motor. You’ll need standard Allen wrenches to fit it.

Check both drop-downs twice before you check out. The motor and transducer you choose decide which version we send.

Once the zero degree transducer mount is tightened down, the transducer points the same way every trip, and on a trolling motor the view turns with the motor.

Choosing your transducer option

Pick the transducer you actually own. The LVS32 and LVS34 are Garmin LiveScope transducers, and the LVS42 and LVS44 are the LiveScope 2 models. Garmin’s LiveScope comparison helps if you’re still deciding, and our Garmin LiveScope guide covers the setup side.

For other angles and mounting styles, see our Live View transducer mounts, including the Live View Transducer Mount for Trolling Motor.

Fitting the zero degree transducer mount

Snug the stainless hardware, then check it again after the first couple of trips. A drop of blue Loctite on the threads helps on a motor that sees a lot of vibration. Route the transducer cable with enough slack for the motor to turn, stow and deploy without pulling on it.

If you change transducers later, say from an LVS34 to an LVS44, email us to check whether the mount needs to change too.

Questions

Is the transducer included?

No. The zero degree transducer mount is the bracket and hardware only.

Does the zero degree transducer mount work on a pole?

Yes. Pole Mount is one of the motor options, offered with all five transducers.

Will it fit my Ultrex Quest with an LVS34?

That’s the Quest pairing our fitment note names. For the LVS42 or LVS44 on a Quest, email us first.

Email sales@trollingmotorsdirect.org with your boat, motor and transducer and we’ll confirm the right version before you order.

Additional information

Trolling Motor Model

Ultrex, Ghost, Force, Fortrex, Maxxum, Power Pole ZR, Tour Pro, Ultrex Quest, Edge, Pole Mount

Transducer

LVS32, LVS34, Lowrance Active Target, LVS 42, LVS 44

Related products

error: Content is protected !!