Description
The Garmin Force Kraken trolling motor is Garmin’s brushless bow mount for bay boats, center consoles and other hulls with a tall bow. It’s built for salt and fresh water, deploys and stows on a pivot-style mount, and has GPS and a heading sensor built in for anchor lock and route following. Order it in black or white and in four shaft lengths.
Colors and shaft lengths
| Color | Shaft lengths we offer |
|---|---|
| Black | 48, 63 or 75 inch |
| White | 48, 63, 75 or 90 inch |
The 90 inch shaft only comes in white. Taller bows need a longer shaft length to keep the prop and nose in the water when the boat pitches, so measure from your mounting surface to the waterline. If you land between two sizes, send that number and your boat model to us.
What the Garmin Force Kraken trolling motor brings
- Brushless motor that runs quietly and efficiently, for skinny flats or deeper water
- Anodized aluminum and stainless steel construction made for salt
- Pivot-style mount suited to boats with high freeboard
- Built-in GPS and heading sensor for anchor lock, route tracking and speed control
- Wireless link to compatible Garmin chartplotters
Anchor lock is where a motor like this earns its keep offshore: hold over a reef or a wreck while you fish, with the motor correcting for wind and current. Our saltwater trolling motor guide covers what to look for in a salt-rated motor.
Rigging and power
Garmin’s Kraken install manual calls for a 24 or 36 V battery bank that can deliver 60 A continuously, and a 60 A circuit breaker, which isn’t included. The mount goes on the bow with its U-shaped cutout hanging over the gunwale, and Garmin wants all six bolts used, or at least four where six won’t fit. The power cable is about 4 ft, so plan your plug or terminal spot around that.
For a quick disconnect, Garmin’s manual allows a plug and receptacle rated 60 A or more. We carry the Garmin 60A breaker and Garmin’s 70A plug set. A deck mount stabilizer supports the motor when stowed and ships with some models.
Sonar and add-ons
Garmin notes that only select Kraken models have a built-in 12-pin transducer. Our listing doesn’t call one out, so email us before ordering if you need sonar in the nose. The GT56UHD-TR transducer is sold by Kraken shaft length, and our Spy Pole Kraken mount fits the 48 and 63 inch shafts if you want to add Spy Pole.
Deploying, stowing, calibration and anchor lock setup are all in Garmin’s Kraken owner’s manual, which is worth reading before the first launch.
Kraken questions
Which shaft length do I need for a Garmin Force Kraken trolling motor?
It depends on how high your bow sits above the water. Send us your boat model and the deck-to-waterline measurement and we’ll help you choose.
Can I return the Kraken?
No. The Kraken is final sale like all the electronics we sell; see our returns policy. Our shipping policy has delivery details, including free ground shipping to the lower 48 and DC on orders of $199 or more.
Email sales@trollingmotorsdirect.org with your boat, bow height and battery setup, and we’ll help you spec the right Garmin Force Kraken trolling motor. Every Garmin motor we carry is in our Garmin trolling motors category.











