Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin Deck Mount Stabilizer for Kraken Motors

$109.99

Garmin’s deck mount stabilizer for Force Kraken trolling motors (010-12832-55). It supports the motor when stowed. Some Kraken models ship with one, so check your box before ordering.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

When a Force Kraken trolling motor is stowed, the Garmin Kraken deck mount stabilizer, part 010-12832-55, is what supports it on the deck. Garmin sells it as an optional accessory and packs it with some Kraken models, so check your Kraken’s box before you order. It’s a new Garmin unit.

Why a stowed Kraken needs support

A big saltwater motor puts a lot of weight on its mount when it’s stowed. Every wave you run through and every pothole on the way to the ramp bounces it. Garmin’s Force Pro manual says its stabilizer is there to cut the risk of damage in rough water and while trailering, and the Kraken manual describes this one doing the same job: supporting the motor when stowed.

Without that support, every bump goes into the mount and the pivot instead. A stabilizer gives the stowed motor something solid to rest on.

Garmin Kraken deck mount stabilizer at a glance

  • Garmin part number 010-12832-55
  • Made for Garmin Force Kraken motors
  • Supports the motor in the stowed position
  • About 0.66 kg (1.45 lb), per Garmin’s Kraken install manual
  • Installation instructions are packed with the stabilizer

Fitting it

Stow the motor and see where the shaft rests over the deck, then position the stabilizer so it carries the motor without forcing it sideways. Mark the holes, check underneath for wiring and hull structure before drilling, and seal every hole. Follow the instructions in the box for the hardware.

Once it’s in, deploy and stow the Kraken several times. It should settle onto the stabilizer cleanly each time without binding the pivot. Garmin’s Kraken installation manual covers the mount itself if you’re fitting the motor at the same time.

Check the stabilizer’s fasteners at the start of each season. Salt, vibration and trailer miles all work on deck hardware.

If you bought a used Kraken or moved the motor from another boat, the stabilizer is an easy part to lose track of; it may still be bolted to the old deck. The Garmin Kraken deck mount stabilizer is the replacement for that situation, and it’s the same Garmin part number either way.

Before you ask

Does my Kraken already have one?

Possibly. Garmin includes the stabilizer with some Kraken models, so look in your box and on the deck before ordering.

Will the Garmin Kraken deck mount stabilizer fit a Force or Force Pro?

It’s listed for the Kraken only. The Force has its own part, which we list as the Garmin Stabilizer for Force.

Is it returnable?

Read our returns policy before ordering, and email us first if you aren’t sure the motor needs one.

We can confirm the part if you send your Kraken shaft length and boat model to sales@trollingmotorsdirect.org. The Garmin Force Kraken and its other parts are in our Garmin trolling motor accessories.

Related products

error: Content is protected !!