Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Mega Mount Adapter Plate – Scratch & Dent

$41.00

Our 1/2 inch black powder coated aluminum adapter plate with cosmetic finish flaws. Enlarges the attachment area for our single, double, telescoping and over the side mounts. Plate only. Sold as is.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 127-SD
Category: ,

Description

A mega mount adapter plate scratch and dent unit is the same 1/2 inch thick plate we sell new, with cosmetic flaws in the finish. It sits under the mount, so once it’s installed much of the plate is covered and a blemish may not show. It’s sold as is, final sale.

What’s wrong with them

Expect one or more of these:

  • scratches in the finish
  • machining defects in the finish
  • color defects
  • nicks in the finish

Scratch and dent is sold as is, with no returns or refunds. That’s different from our usual 30-day return on unused non-electronic items. The details are on our returns page, and the rest of the discounted stock is in our scratch and dent section.

Mega mount adapter plate scratch and dent, side view of the 1/2 inch plate

What the mega mount adapter plate scratch and dent does

The plate was designed in response to requests for a way to enlarge the attachment area and stabilize our double and single mounts. It works really well on thin decks, like many aluminum boats. Fasten the plate to the boat, then attach your mount to the plate with the screws provided.

A tall graph mount acts like a lever on the deck. On a thin aluminum boat deck, a few screws in a small area take all of that. A 1/2 inch plate spreads it out. Pair it with an under plate below the deck and the deck is sandwiched between the two.

When a mega mount adapter plate scratch and dent unit makes sense

It makes the most sense if your mount will cover most of the plate, or if you’re rigging a working boat where finish isn’t a priority. If the plate will be in plain view and you care how it looks, the new one is the better buy. Either way, the plate does the same job of spreading the load on a thin deck.

Fits

  • Double mounts and single mounts
  • Telescoping deck and telescoping swivel mounts
  • The Over the Side Mount

Specs and what’s included

ItemDetail
Thickness1/2 inch
MaterialBlack powder coated aluminum (more on powder coating)
IncludedAdapter plate and screws to attach the mount to it
Not includedDeck mounting hardware; the mount in the photos

Questions

Is it the same plate as new?

Yes, apart from the finish. The new one is the Mega Mount Adapter Plate.

Can I return a mega mount adapter plate scratch and dent unit?

No. It’s final sale, so check that your mount is on the fit list first.

Does it come with a mount?

No, the plate only.

Email sales@trollingmotorsdirect.org with your mount and deck type before you order a mega mount adapter plate scratch and dent unit, and we’ll confirm the plate suits it. Deck mounting hardware isn’t included, so plan on stainless fasteners long enough for the plate and your deck.

Related products

error: Content is protected !!