Description
On an aluminum boat with a thin deck, the Mega Mount Adapter Plate gives our graph mounts a bigger, steadier footprint. It was designed in response to requests for a plate that would enlarge the attachment area and stabilize our double and single mounts. It works on other decks too, but thin ones benefit most.

How the mega mount adapter plate works
- Fasten the plate to your boat. Deck mounting hardware is not included.
- Set your mount on the plate.
- Attach the mount to the plate with the screws provided.
The mount’s load now spreads across the whole plate instead of a few screws in a thin deck. Add an under plate below the deck and the deck is sandwiched between two plates, which is how our big-screen deck mounts come set up. Under plates are in our mount plates section.
Mounts it fits
- Double mounts, including the Double Monitor Mount
- Single mounts
- Telescoping deck mounts
- Telescoping swivel mounts
- The Over the Side Mount
Our Folding Single Mount without Bridge listing also recommends it, with an under plate, for aluminum decked boats.
Before you install
- Placement: set the mount and graph on the plate and check sight lines, casting room and trolling motor clearance before drilling the deck.
- Fasteners: pick stainless deck hardware long enough to pass through the plate, the deck and an under plate if you use one.
- Wires: plan where the cables come up through the deck, since the plate covers that spot.
Specs
| Item | Detail |
|---|---|
| Thickness | 1/2 inch |
| Material | Black powder coated aluminum |
| Included | The adapter plate and screws to attach your mount to it |
| Not included | Deck mounting hardware; the mount shown in the photos |
Why thin decks need it
A graph on a tall arm acts like a lever. Every wave pushes on it, and on a thin aluminum boat deck that force lands on a few screws in a small area. Over time screws work loose or the deck flexes around them. A wider, 1/2 inch plate gives the mount a solid base and spreads that force out.
To hide the hole where wires come up under the plate, add the MEGA CA base to its underside.
Questions
Is the mount included with the mega mount adapter plate?
No. This listing is the adapter plate only; the mount in the photos is not included.
Will it help on a fiberglass boat?
It enlarges the attachment area on any deck. It’s most useful where the deck is thin.
Is there a discounted one?
Sometimes. See the mega mount adapter plate in scratch and dent.
Email sales@trollingmotorsdirect.org with your mount and deck type, and we’ll tell you if you need the plate and an under plate.













