Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance TMC-1 Replacement for Ghost

$163.00

Replacement TMC-1 trolling motor compass for the Lowrance Ghost. It plugs into the foot pedal and feeds heading lock. Lowrance says the Ghost X uses the same TMC-1. The Recon has an internal compass instead.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Heading lock on a Ghost is only as good as its compass, and the Lowrance TMC-1 compass is that sensor, sold here as a replacement. It’s a separate puck that plugs into the Ghost’s foot pedal. Lowrance says the Ghost X uses the same TMC-1.

What the TMC-1 does

Heading lock holds a compass course so you can work a bank or troll a straight line without steering. The motor gets that heading from the TMC-1. If the puck is cracked, damaged or still giving bad readings after a calibration, heading lock wanders or won’t hold.

A TMC-1 comes in the box with every new Ghost, along with the HDI nosecone, the sonar adapter cable and a network T-connector, so you only need this one to replace a damaged or lost puck. The Recon doesn’t use one. Its compass is internal, so this part is for the Ghost and Ghost X. Our spot lock guide explains how heading and anchor modes work.

Mounting the Lowrance TMC-1 compass

Placement matters more than anything else with a compass. Lowrance’s install guide gives these rules:

  • Mount it flat, with the arrow pointing forward and parallel to the keel.
  • Keep it at least 3 ft from engines, ignition wiring and large steel or iron objects.
  • Keep it at least 2 ft from the trolling motor head and mount.

If the cable won’t reach a clean spot, Lowrance sells a TMC-1 extension cable (000-15582-001). Email us if you need one.

Calibrating after you fit it

Calibrate on calm water with room to turn a full circle. These steps are from the Ghost owner’s manual:

  1. Enter configuration mode by pressing and holding Configurable keys 2 and 3.
  2. Press and release Configurable key 3. The direction indicator flashes and you’ll hear two long beeps.
  3. Turn the boat through 390 degrees at 2 to 3 degrees per second. Two beeps mean the turn was too fast or too slow.
  4. When it’s done, the indicator stops flashing and you’ll hear three long beeps. Exit configuration mode.

Lowrance also says to recalibrate after you’ve traveled a long way from where you last calibrated.

Compass questions

Does the Lowrance TMC-1 compass work with the Recon?

The Recon has an internal compass and no puck, so it doesn’t need one.

Why does heading lock still drift after I fitted a new one?

Check the placement first. The manual’s troubleshooting list starts with making sure the TMC-1 sits somewhere free of magnetic interference. Then recalibrate.

Do I have to calibrate a new one?

Yes. Run the calibration above before you rely on heading lock. The compass is final sale like our other electronics (returns policy). Pair it with the TMR-1 remote if you’re adding control from the back deck, and see Lowrance trolling motor accessories for other Ghost parts.

Email sales@trollingmotorsdirect.org with your Ghost model and where you plan to mount the Lowrance TMC-1 compass, and we’ll help you check the spot.

Related products

error: Content is protected !!