Description
Deep water is where the Lowrance 8-pin HDI Skimmer 50/200/455/800 earns its place. It’s a transom-mount transducer listed for Hook and Hook Reveal units, with a temperature sensor built in. It pairs traditional broadband sonar at 50 and 200 kHz with DownScan Imaging at 455 and 800 kHz, so one transducer gives you both the fish arches and the picture-like view of structure. Model number is 000-15639-001.
Why pick the 50/200 version
Lowrance sells this HDI transducer in two frequency sets. The 50 kHz channel on this one is the deep-water choice: a lower frequency travels farther before it fades, which matters on big reservoirs, the Great Lakes and inshore salt. The 200 kHz channel handles shallower water with tighter detail.
If you fish mostly natural lakes and rivers, the Lowrance 8-pin HDI Skimmer 50/200/455/800 is probably more than you need. Look at the 83/200 version. The 83 kHz cone is wider, so it covers more bottom in shallow water.
Specs and what’s in the box
| Item | Detail |
|---|---|
| Sonar frequencies | 50/200 kHz broadband |
| DownScan frequencies | 455/800 kHz |
| Temperature sensor | Yes, built in |
| Elements | 2 |
| Mounting | Transom |
| Cable | 6 m (20 ft) |
| Connector | 8-pin push fit |
| Included | Transducer, mounting bracket and hardware |
Mounting the HDI skimmer on the transom
Pick a spot where water flows clean across the transom at speed. Stay clear of strakes, rivet lines, the outboard’s prop wash and any spot right behind a hull fitting, since bubbles there show up as clutter on screen. Follow the template and angle setting in Lowrance’s instructions; small changes in tilt make a big difference to the DownScan picture.
Sonar basics, like why lower frequencies reach deeper, are covered well in this fishfinder overview. For the install itself, the 20 ft cable reaches the console on most small boats. Route it away from power leads and leave a loop near the transducer so the bracket can kick up if you hit something.
Lowrance 8-pin HDI Skimmer 50/200/455/800 questions
Will it plug into my HDS or Elite?
This one uses the 8-pin push-fit plug and is listed for Hook and Hook Reveal. Current HDS PRO and Elite FS displays take 9-pin transducers, so check the port on the back of your display before ordering. Lowrance 9-pin options are in our Lowrance transducers section.
Does the Lowrance 8-pin HDI Skimmer 50/200/455/800 show SideScan?
No. HDI covers sonar and DownScan only, which is plenty for marking fish and reading bottom under the boat. For side imaging you’d need an Active Imaging transducer and a display that supports it.
Can I return it if it doesn’t fit?
Transducers are electronics, and electronics are final sale (see returns). Ask us first if you’re unsure about the plug.
Email sales@trollingmotorsdirect.org with your Hook model and boat, and we’ll confirm this 8-pin HDI skimmer is the right match before you buy. There’s more background in our Lowrance fish finder guide.










