Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance HDI Transom HDI Transducer with Temp 8-Pin 83/200/455/800kHz

$121.00

Transom-mount Lowrance HDI Skimmer with built-in temp: 83/200 kHz sonar and 455/800 kHz DownScan on an 8-pin push-fit plug with a 20 ft cable. Model 000-15640-001. Check your unit’s sonar port first.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

For most freshwater boats, the Lowrance 8-pin HDI Skimmer 83/200/455/800 is the frequency set that makes the most sense. You get broadband sonar at 83 and 200 kHz, DownScan Imaging at 455 and 800 kHz, and a water temp sensor, all in one transom-mount housing on a 20 ft cable. The Lowrance model number is 000-15640-001.

What the four frequencies do

  • 83 kHz: the wide sonar cone. It covers more bottom under the boat, which helps in the shallow and mid-depth water most lake anglers fish.
  • 200 kHz: a narrower cone with sharper separation between fish and bottom.
  • 455 kHz DownScan: the deeper-reaching imaging channel.
  • 800 kHz DownScan: the finest detail, best in shallower water.

Lowrance calls this Hybrid Dual Imaging: sonar arches and DownScan structure from a single transducer with two elements. On a split screen you can line up a fish arch on the sonar side with the brush pile it’s holding on in the DownScan view. It’s the same 83/200/455/800 frequency set Lowrance uses in its HDI nosecone for the Ghost.

Lowrance 8-pin HDI Skimmer 83/200/455/800 at a glance

SpecValue
Frequencies83/200 kHz sonar, 455/800 kHz DownScan
Temp sensorBuilt in
MountTransom
Elements2
Plug8-pin push fit
Cable length6 m (20 ft)

The supplier listing for the Lowrance 8-pin HDI Skimmer 83/200/455/800 doesn’t spell out the box contents. If you need the bracket and hardware confirmed before ordering, email us and we’ll check.

Check the plug before you order

Lowrance has used 7-pin, 8-pin and 9-pin sonar plugs across its range, and they don’t interchange without the right adapter. This one is 8-pin. The 50/200 sibling of this transducer is listed for Hook and Hook Reveal, and it uses the same plug. Look at the sonar port on your display and match it before you buy.

If you’d rather run it on the trolling motor than the transom, we also carry a trolling motor adapter for 83/200 HDI transducers. Ask us to confirm it suits this one.

Questions about this HDI transducer

Is 83 kHz or 50 kHz better for me?

In shallow and mid-depth water, most anglers prefer 83 kHz for its wider cone. If you spend real time in deep water, the 50/200 version is the better fit.

Can the Lowrance 8-pin HDI Skimmer 83/200/455/800 replace my old skimmer?

Often, yes, if your unit has the 8-pin port and supports DownScan. Check that your display can run all four frequencies, since an older unit may only use the sonar side. The bracket holes may not line up with your old ones, so plan to seal the old holes.

Send your display model and boat to sales@trollingmotorsdirect.org and we’ll confirm the 8-pin HDI skimmer 83/200/455/800 fits. More options are in Lowrance transducers.

Related products

error: Content is protected !!