Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin Livescope 2 LVS42HD Transducer

$2,199.99

LiveScope 2 HD live sonar transducer (010-03899-00) that connects straight to a compatible Garmin chartplotter and power, with no black box. Highest detail at castable range, bottom tracking to 125 ft in freshwater. Perspective Mode Mount included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Garmin LVS42HD transducer is the high-definition model in the LiveScope 2 line, built for seeing fish and lures in fine detail at castable range. Garmin part number 010-03899-00 plugs straight into a compatible chartplotter and a power source, so there’s no black box to mount. It tracks bottom out to 125 ft in freshwater, which tells you the kind of water it’s made for.

What LiveScope 2 HD changes

Compared with earlier LiveScope, Garmin says you get up to 50% more detail and 20% higher resolution near the boat, with fewer sonar artifacts, integrated image stabilization and better stitching. Processing is quick enough to watch a fish turn on the bait and time the hookset. The beam is wider in Forward, Down and Perspective modes, and the adjustable Perspective Mode Mount comes with it.

Two practical touches: water detection shuts the sonar off when the transducer is out of the water, and a sensor reads water temperature when it’s in. On a compatible chartplotter you get more than 15 color palettes.

Garmin LVS42HD transducer specs

These figures come from Garmin’s LiveScope 2 installation instructions, which cover the LVS42 and LVS44.

ItemLVS42
Frequency850 to 1,600 kHz
Range, Down and Forward125 ft (varies with salinity, bottom and conditions)
BeamwidthForward 20 x 165 degrees; Down and Perspective 20 x 180 degrees
Size5.2 x 5.3 x 1.9 in
Weight with cable3.6 lb
Operating temperature32 to 104°F
Fuse7.5 A fast-acting, in the power line

Install and mounting notes

The BlueNet cable plugs into a compatible chartplotter or network switch, with an adapter cable for units that only have the older Garmin Marine Network port. Update the chartplotter software when you install it. The perspective mount won’t fit shafts under 1.25 in, and Garmin recommends the rubber liner below 1.5 in. Mount it as far from the motor as you practically can for a cleaner image.

The Garmin LVS42HD transducer also fits Garmin’s Spy Pole for wireless sonar control separate from the trolling motor. Pair it with a GT360UHD and you can overlay live sonar on the 360-degree image for a 3D view.

Questions

Should I get the Garmin LVS42HD transducer or the LVS44?

If you fish shallow to mid-depth water and want the most detail near the boat, the HD makes sense. If you fish deeper than 125 ft or want more reach, the LVS44 tracks bottom to 250 ft.

Does LiveScope 2 HD need a GLS 10 black box?

No. It connects directly to a compatible chartplotter and power. Confirm your display with us first, since electronics are final sale under our returns policy.

Where can I learn more about LiveScope?

Our LiveScope guide covers the models and setups, and Garmin’s LiveScope 2 HD page has the current details.

Browse our Garmin transducers, or email sales@trollingmotorsdirect.org with your chartplotter, trolling motor and how you plan to mount it, and we’ll check the fit.

Related products

error: Content is protected !!