Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin 010-13350-02 Extension 30 Ft

$149.99

Garmin’s 30 ft LiveScope transducer extension cable (010-13350-02). For long runs from a bow-mounted transducer back to a sonar module at the console or stern. Measure the full route first.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Garmin LiveScope extension cable 30 ft (part 010-13350-02) is the longest of Garmin’s LiveScope Transducer Extension Cables. It’s meant for boats where the transducer is up front on the trolling motor and the sonar module lives a long way back, at the console, under a seat, or near the stern. If the 10 ft size won’t close the gap, this is the next step.

Boats that usually need 30 feet

These are the setups where the Garmin LiveScope extension cable 30 ft tends to make sense:

  • Bay boats and center consoles where the electronics are wired at the helm.
  • Pontoons, where the cable may follow the deck and rail a long way before it reaches the console.
  • Bass boats rigged with the sonar module in a rear compartment to keep the bow box free.
  • Any boat where the cable has to take a long detour through rigging tubes instead of a straight path.

On smaller rigs, 30 feet can be far more than you need, and a big coil of spare cable is one more thing to tie down. Measure first. The 10 ft extension and the 3 ft extension are also in stock.

Pulling a long cable without damage

  1. Lay out the route with a pull line or fish tape before you open the package.
  2. Tape the connector flat to the pull line and wrap it so the edges can’t catch inside the rigging tube.
  3. Pull slowly with a helper feeding from the other end. If it jams, back up and try again rather than forcing it.
  4. Leave slack at the bow so the trolling motor can stow, deploy and turn freely.
  5. Coil any spare loosely near the module and secure it, keeping it away from the trolling motor power leads to help keep interference out.

Garmin LiveScope extension cable 30 ft details

ItemDetail
Garmin nameLiveScope Transducer Extension Cable
Part number010-13350-02
Length30 ft
ConnectsLiveScope transducer cable to the sonar module side

Garmin’s LiveScope Plus LVS34 installation manual shows the transducer plugging into the module’s XDCR port and notes that an optional extension cable is available. It doesn’t list a maximum length, so we’d still keep the run as direct as the boat allows.

Final sale, so confirm first

All electronics, cables included, are final sale at our shop (see returns). Send us your boat length, transducer model and where the module is mounted, and we’ll double-check the length with you before the Garmin LiveScope extension cable 30 ft ships. Orders of $199 or more ship free by ground to the lower 48 and DC.

For the rest of the system, browse Garmin transducers or read our Garmin LiveScope guide.

Quick answers

Is this the same cable as the 10 ft, just longer?

Garmin sells all three lengths under the same LiveScope Transducer Extension Cable name. What changes is the length and the part number: 010-13350-02 is the 30 ft version.

Can I cut it shorter?

No. Cutting and splicing a sonar cable is asking for noise and water problems. Pick the length that fits and coil the spare.

Email sales@trollingmotorsdirect.org, Monday to Friday from 9am to 6pm, with your boat and motor details and we’ll help you get the length right.

Related products

error: Content is protected !!