Description
The Garmin LVS44 transducer is the standard LiveScope 2 model, made to show fish and lures in real time with more reach than the HD version. Part number 010-03899-10 tracks bottom out to 250 ft in freshwater and connects straight to a compatible chartplotter and power, with no black box. Garmin rates it at up to 20% higher resolution than earlier LiveScope, with fewer artifacts and smoother images.
Garmin LVS44 transducer specs
| Item | Spec |
|---|---|
| Frequency and power | 600 to 1,050 kHz, 392 W transmit |
| Maximum depth | 250 ft, Down and Forward |
| Beamwidth | Forward 20 x 165 degrees; Down and Perspective 20 x 180 degrees |
| Target separation | 5.7 in at 30 ft; 12.6 in at 100 ft |
| Power | 10 to 35 V, 32 W max, 7.5 A fuse, 2-wire connection |
| Network | 1 BlueNet port (small connector) with GMN1 adapter |
| Cable | 18 ft (5.5 m), 7 pins |
| Size and weight | 6.3 x 5.6 x 1.9 in; 3.93 lb |
| Operating temperature | 0 to 40°C |
| Compass-safe distance | 4 in |
In the box
- LiveScope 2 LVS44 transducer
- Adjustable perspective shaft mount
- Trolling motor barrel mount
- Power/network cable with adapter
- Adapter disc for the Force Kraken LiveScope transducer mount
- Hardware and documentation
Modes and mounting
Forward mode scouts ahead of the boat, Down gives a wide live view straight under you, and Perspective shows an overhead view of what’s around the boat, handy in shallow water. Water detection shuts the sonar off when it’s out of the water, a sensor reads water temperature, and compatible chartplotters offer more than 15 color palettes.
The barrel mount puts it on the trolling motor shaft, and the adjustable perspective mount handles Perspective mode. It also fits Garmin’s Spy Pole for wireless control independent of the trolling motor, and with a GT360UHD you can overlay live sonar on the 360-degree image for a 3D view.
Install tips
Garmin’s installation instructions for the Garmin LVS44 transducer call for updating the chartplotter software at install and keeping the 7.5 A fuse in the power line. Tape the cable above and below any rotating joint, leave a service loop, and turn the motor through its full range to make sure nothing pinches. Mount it as far from the motor as practical.
Questions
Is the Garmin LVS44 transducer the same as LiveScope Plus?
No. LiveScope Plus, the LVS34, runs through a GLS 10 black box. The LVS44 is LiveScope 2 and connects directly.
LVS44 or LiveScope 2 HD?
The LVS42HD gives more detail close in but tracks bottom to 125 ft. The LVS44 reaches 250 ft, so it suits deeper lakes.
Can I return it?
No, it’s final sale under our returns policy, so confirm your chartplotter first.
Read our LiveScope guide or browse Garmin transducers. Email sales@trollingmotorsdirect.org with your chartplotter and trolling motor and we’ll check the fit before you order.










