Description
If your Minn Kota already has Built-in MEGA Imaging or US2 sonar in the lower unit, the Humminbird Xplore 10 No Transducer saves you paying for a transom ducer you’ll never bolt on. It’s the 10.1 inch XPLORE MEGA SI+ with no transducer in the box (model 412010-1CHO).
Built for the trolling motor side of the boat
XPLORE’s compatibility list leans heavily on Minn Kota. This head reads Built-in MEGA Side Imaging and MEGA Down Imaging, Minn Kota US2 sonar, and controls i-Pilot Link and Advanced GPS Navigation from the screen. Talon and Raptor shallow water anchors connect by Bluetooth, and the whole setup runs on the One-Boat Network.
At the bow, a 10.1 inch, 1280 x 800 screen is big enough for sonar plus chart, and still small enough to keep off your feet.
Mapping is ready on day one. The Humminbird Xplore 10 No Transducer has internal GPS, the Basemap with 10,000+ lakes and U.S. coastal coverage, and AutoChart Live with 8 hours of recording for your own contours, bottom hardness and vegetation. Two micro SD slots take an AutoChart Zero Line card or Navionics charts.
Humminbird Xplore 10 No Transducer specs
| Item | Spec |
|---|---|
| Model | 412010-1CHO, control head only |
| Screen | 10.1 in color TFT, 1280 x 800, touch and keypad |
| Sonar processing | MEGA SI+, MEGA DI+, Dual Spectrum CHIRP |
| Optional transducers | 50/83/200 kHz; Airmar High, High Wide, Medium, Medium Wide, Low |
| Charts | Basemap plus included LakeMaster and CoastMaster VX card; Navionics compatible |
| Networking | Ethernet, NMEA 2000, Wi-Fi, Bluetooth |
| Power input | 10.8-20 VDC |
| Gimbal footprint | 12.098 in W x 7.702 in H x 3.891 in D |
| Warranty | 2-year limited |
Adding forward-facing and 360 sonar
MEGA Live 2 plugs into the head through Ethernet and needs no separate sonar box, and Humminbird lists it as able to share a control head with Built-in MEGA Imaging or MEGA 360. If you run more Ethernet devices than the unit has room for, XPLORE is listed as compatible with the 5-port Ethernet switch. For GPS heading, use the NMEA 2000 version of Humminbird’s heading sensor.
Quick answers
Will the Humminbird Xplore 10 No Transducer work with my older Minn Kota?
It depends on what sonar the motor has. Built-in MEGA Imaging and US2 are on the list. Send us the motor model and we’ll check.
Are charts included?
Yes, the LakeMaster and CoastMaster VX card with U.S. and Canada standard data comes with it.
What’s the difference from the CMSI+ kit?
Only the transducer. The Xplore 10 CMSI+ adds the XM 14 HW CMSI T transom transducer.
Browse other Humminbird graphs, or read the release coverage at Wired2Fish. Electronics are final sale under our returns policy, so email sales@trollingmotorsdirect.org with your boat and trolling motor model before ordering.










