Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Humminbird Xplore 10 CMSI+

$2,299.99

The 10.1 inch Humminbird XPLORE with MEGA Side Imaging+, MEGA Down Imaging+ and Dual Spectrum CHIRP. Ships with the XM 14 HW CMSI T transom transducer and a LakeMaster/CoastMaster VX card. Model 412010-1.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

For a lot of boats the Humminbird Xplore 10 CMSI+ is the middle ground: a 10.1 inch, 1280 x 800 touchscreen that’s clearly bigger than a 9, without the dash space a 12 needs. This kit (model 412010-1) includes the XM 14 HW CMSI T transom transducer and a LakeMaster and CoastMaster VX chart card for the U.S. and Canada.

What it shows you

Three sonar types run off the one transducer. MEGA Side Imaging+ reads 800 ft side to side at 455 kHz and 250 ft in MEGA. MEGA Down Imaging+ reaches 400 ft at 455 kHz and 200 ft in MEGA. Dual Spectrum CHIRP gives you 2D sonar to 1,200 ft with the standard transducer, using Wide mode to search and Narrow mode to pick out detail, with 2.5 in target separation.

For deep salt water, the head supports an optional 50 kHz transducer for 3,500 ft of 2D depth, plus 83/200 kHz and several Airmar options.

Maps, waypoints and AutoChart

The Humminbird Xplore 10 CMSI+ has internal GPS and the Humminbird Basemap with 10,000+ lakes and U.S. coastal coverage. The included VX card adds LakeMaster and CoastMaster data, and Navionics Gold, HotMaps, Platinum and Platinum+ also work. AutoChart Live records 8 hours of your own contours and bottom hardness, more with an AutoChart Zero Line SD card in one of the two micro SD slots.

It stores 10,000 waypoints, 50 routes and 50 tracks, and the waypoint system syncs fish spots to your phone with custom colors and icons.

Installation notes

  • Standard mount is a gimbal; the gimbal footprint is 12.098 in W x 7.702 in H x 3.891 in D. An in-dash kit is optional.
  • Power input is 10.8-20 VDC, so it runs on a 12 volt system.
  • The XM 14 HW CMSI T is a transom mount with a 20 ft cable and built-in temperature sensor.
  • Ethernet, NMEA 2000, Wi-Fi and Bluetooth are built in for later add-ons.

Boat control

Through the One-Boat Network the Humminbird Xplore 10 CMSI+ talks to Minn Kota i-Pilot Link and Advanced GPS Navigation, deploys Talon or Raptor anchors over Bluetooth, and runs Cannon Optimum downriggers. It’s also ready for MEGA Live 2, MEGA 360 and CHIRP Radar.

Questions

What warranty does the Humminbird Xplore 10 CMSI+ carry?

Humminbird lists a 2-year limited warranty, handled by the manufacturer.

Can I use the GPS heading sensor I have from an older Humminbird?

XPLORE is listed for the NMEA 2000 heading sensor, not the original AS GPS HS. Check your part number before you count on it.

Is there a head-only version?

Yes, the Xplore 10 with no transducer.

See the full lineup in Humminbird graphs or on Humminbird’s XPLORE page. Electronics are final sale; email sales@trollingmotorsdirect.org with your boat, motor and graph for fit help.

Related products

error: Content is protected !!