Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Trolling Motor Slide

$499.00

Heavy-duty slide that goes under your bow mount so the trolling motor sits 7 inches further back on the deck. Marine-grade plastic, black anodized aluminum and stainless hardware. Made in the USA. Doesn’t currently fit Quest motors.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This trolling motor slide goes under your bow mount and lets you slide the motor 7 inches further back onto the deck. It’s for boats where the motor sticks too far off the front, which tends to happen with long shafts, short decks and big bow overhangs. It doesn’t currently fit Quest motors.

Why move the motor back

A motor that hangs well past the bow catches docks and trailer guides, adds to the boat’s overall length, and makes a longer lever when the stowed motor bounces. Moving it back keeps more of the motor over the boat.

The slide gives you 7 inches of travel, so the motor can sit further back on the deck than the mount alone allows.

Trolling motor slide specs

ItemDetail
Travel7 inches
BuildHeavy duty, marine-grade plastic and black anodized aluminum
HardwareStainless steel
Made inUSA
Doesn’t fitQuest motors, at present

Our main photo shows it fitted under a Garmin Force Kraken. Quest here means Minn Kota’s QUEST series, such as the Ultrex QUEST. For anything else, email us the make, model and shaft length and we’ll confirm fit.

Measure before you order

  • Position: mark where the mount sits now and where it would sit 7 inches back.
  • Deploy clearance: the motor still has to swing down past the bow and gunwale without hitting anything.
  • Stowed position: check the stowed head won’t land on a seat, rod locker lid or console.
  • Underneath: you need access below the deck to fit nuts and washers for the new bolts.

Installing it

Use the stainless hardware with large washers or a backing plate under thin decks, so the load spreads out instead of pulling through. Seal every new hole with marine sealant to keep water out of the deck core. Check the bolts again after the first few trips on the trailer, since new hardware settles.

Our trolling motor mount guide covers slides, stabilizers and sonar brackets together, and more bow hardware is in accessories.

The slide qualifies for our free ground shipping to the lower 48 and DC, which starts at $199 (shipping policy). It’s a non-electronic part, so it can be returned unused within 30 days under our returns policy.

Slide questions

Does the trolling motor slide fit a Minn Kota Ultrex QUEST?

Not at the moment. It currently doesn’t fit Quest motors.

How far does the trolling motor slide move the motor?

7 inches back onto the deck.

Will it fit my Garmin, Lowrance or older Minn Kota?

Send us the motor model and shaft length and we’ll check. It’s shown here under a Garmin Kraken.

Email sales@trollingmotorsdirect.org with your boat, your motor and a photo of the bow, and we’ll tell you whether the trolling motor slide will work on your deck.

Related products

error: Content is protected !!